Jump to content
SAU Community

Recommended Posts

Sounds more like that it is spinning when it shouldn't. This is because it's a viscous clutch fan, and when it fails, it locks up.

If you start the car when it is dead cold, it should spin up and then come off after a minute.

Or, to test whether it has seized or not, tomorrow morning, open the hood, and try to spin the fan with your hand (car off!). If it resists a LOT, then it's seized and you need to buy a new one. Changing it is pretty easy though (4 bolts), and if you wiggle it, just a little bit, (hehe) it should slide past the radiator shroud.

Sounds more like that it is spinning when it shouldn't. This is because it's a viscous clutch fan, and when it fails, it locks up.

If you start the car when it is dead cold, it should spin up and then come off after a minute.

Or, to test whether it has seized or not, tomorrow morning, open the hood, and try to spin the fan with your hand (car off!). If it resists a LOT, then it's seized and you need to buy a new one. Changing it is pretty easy though (4 bolts), and if you wiggle it, just a little bit, (hehe) it should slide past the radiator shroud.

can it still eb driven until my new fan arrives? and where to get a new one? how much?

Edited by Suspense

You can drive it as much as you like. It will make a lot of noise from the air being pushed, and it will still cool everything (even when it DOESN'T need it).

New fan I think is under $200... Call Nissan?

the clutch on it has FAILED dude. this means what it does next is anybody's guess. which means it may loosen at any moment and start free spinning, i.e. not cool your motor.

if you're going to spend $200 on a clutch fan, why not upgrade to an electric thermofan for a bit more. i'll be doing that mod soon.

Don't panic....... Pull the fan & clutch off, if you're in Sydney, go see the boys at Just Jap in Kirrawee or SSS in Giraween ( or the like ) and grab a good condition second hand clutch off them !! Just make sure it bolts up to YOUR fan and looks the same ( but better than yours ) and away you go !!!

I was a bit suss on my clutch ( fan ) and scored an almost new clutch off an R34 RB25NEO that fit perfectly in my R32 RB20DET fan and works great !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...