Jump to content
SAU Community

Recommended Posts

hi guys

for sale WEDS SPORT TC005 rims

18x7.5 +33 with 225/40 bridgestone s03 (camber wear)

18x8.5 +44 with 245/40 hankook k104 (near new)

$1600 in melb

mypic37.jpg

mypic44.jpg

mypic40.jpg

mypic41.jpg

mypic42.jpg

pm if you need further details

or email [email protected]

Edited by phantc_s15
  • 1 month later...
  • 3 months later...

any idea if they'd bolt onto an R33 gts-t skyline without spacers?

I have some WORK 2 piece 17x8 & 17x9 rims I might consider trading. Black mulit spoke centres with chrome lip. They have Bridgestone 235/45/R17 tyres on them with about 80% tread left.

at a guess....shouldnt be a prob...happy to test fit (wheels are off my car at the moment)

what work wheels are they? size and offset?

email [email protected] if you have any pics

cheers

there called WORK "Ewing". black centre's chrome lip.

17x8 front rims 235/45/r17 +43 Bridgestone RE030 Potenza tyres

17x9 rear rims 235/45/r17 +47 Bridgestone RE030 Potenza tyres

I have 2 of the centre caps, but they look better without them on! The tyres have only done around 15 - 20,000km of easy street driving, HEAPS left, and no bad camber wear.

pic is attatched below of the rims.

post-7879-1168510640.jpg

i didnt think that they'd fit on my skyline either....but the clear brakes and fit in the guards perfectly. My reading of the stickers inside them could be wrong....there very faded an hard to read.

is there anyway I can measure?

they sit exactly the same on my skyline as my other 17's which are +38 front an +35 rear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...