Jump to content
SAU Community

Recommended Posts

All parts are in fine working order as they were pulled off my own car only due to upgrading or bought and no longer required.

Im in Brisbane Southside, but will send anywhere at buyers expense.

Email me HERE if any queries, questions, or more pics.

Thanks. :sorcerer:

R32 GTR Gearbox with transfer case- $1000

Traveled aprox 72,000kms, synros are perfect, was only run behind a stock motor.

Gearbox Pic 1

Gearbox Pic 2

Transfer Case Pic

Impul Hi-Power Ecu: $250

- Better air fuel ratios

- Takes out speed cut

- Increases rev limit to 9000rpm

- Tweaked fuel maps so you can run more boost safely

- Plugs straight in, no other modifications required

Impul High Power ECU Unit Pic

R32 GTR brake lines for all four corners-$50

32gtrbrakelines.jpg

R32 GTR Intercooler piping -$100

32gtrcoolerpiping.jpg

R32 GTR Thermo Fan -$100

- Perfectly Working Thermo fan only removed to gain extra space in the front

32gtrfan.jpg

32gtrfan2.jpg

R32 GTR Fog Lights -$100

- Fine working factory Fog lights!

R32gtrfoglamps.jpg

R32 GTR Springs and Inserts -$300

- Need to pass compliance inspection or clear a defect?

R32gtrsusp.jpg

R32gtrsusp1.jpg

R32gtrsusp2.jpg

RB26DETT Brand New OEM Nissan Water Pump -$150

- Brand New still in the box!

R33 GTR RB26DETT stock cam gears-$50

- only removed due to upgrading to adjustable.

R33 GTR Cam Gears.jpg

Edited by CameronBNR32
  • 5 months later...
Still keen to check some close up pics off the rims!

Sorry, have been abit busy. I Took some pics of the rims today..

Edited by CameronBNR32
Sorry, have been abit busy. I Took some pics of the rims today..

Click here for GTR Rim close ups

Will take the rims for $500 if you are cool with that?

Got a quote to get them shipped, so can pick up right away!

Just need an adress? Give me a call on 0412913213 or post your

number if you want me to call to arrange payment?

Thanks Joey...

Will take the rims for $500 if you are cool with that?

Got a quote to get them shipped, so can pick up right away!

Just need an adress? Give me a call on 0412913213 or post your

number if you want me to call to arrange payment?

Thanks Joey...

Hey,

$500 is too cheap for me sorry, for the condition they are in I believe $600 is cheap, I've seen sets that are in worse condition go for ~$700

Hey,

$500 is too cheap for me sorry, for the condition they are in I believe $600 is cheap, I've seen sets that are in worse condition go for ~$700

No worries mate, shipping to were i am will cost me $150-$180

But...

Whats the approx wieght each? So i can get an exact price on shipping?

Thanks again

Joey.

No worries mate, shipping to were i am will cost me $150-$180

But...

Whats the approx wieght each? So i can get an exact price on shipping?

Thanks again

Joey.

Hey the rims weigh 7.5kg each

thanks

  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...