Jump to content
SAU Community

Recommended Posts

  • 2 months later...

after trying all the 98+ fuels for a long time now, the best one i always thought was BP Ultimate (although there wasnt a massive diff), However recently i been using Vortex 98 and out of all the fuels, i think personally vortex 98 stands out, even more than the Shell 100 RON fuel. This is just my opinion. Fuel economy wise, well how do u ever measure fuel economy? unless you never gun the thing, and lets face it, not many of us would go through a full tank of fuel without pushing it here and there so its really hard to measure fuel economy.

most skyline drivers will need to do an ECU reset and run-in (~1000kms) to notice any differences between fuels

i've been running optimax since i bought my car, and when the fuel prices plummeted i switched up to optimax extreme (v-power racing) and noticed a little increase in response.

I've reset my ECU, just coming up to the optimal run-in mileage now and my car goes like a burnt cat. Stupid amount of response and acceleration, hardly even notice it's an NA :happy:

Afaik the 100 octane + 5% ethanol blend is what the japs use and what the skylines are supposed to run on, so that's what's staying in my car from now on, i love it.

yeah i ran the ultimate in my n15 with rnn14 and it was getting about 350-400 per tank ive had the v power racing in for a monthish now and i get 450-500 and i can def notice its alot smoother on accelerating and has bit more punch but nothing over the moon...

mainly use optimax inthe gtr no v power racing on the coast near me yet but have had the ultimate and no defference in both so far.... i have had caltex 98 in the sss and wasnt good but couldve been a bad batch.

just get some martini racing fuel 110ron hehehe

I only use Caltex Vortex or 91 (Not in a skyline, waiting till I am 21 now - just a ford falcon)

It is only about 7c more than 91 at my station, and nambour generally has the cheapest fuel in the sunshine coast (Normal Unleaded was 100.9c today compared to BP 104.9 AND I have to go out of my way to get to BP).

I put a tank of V power in today, I noticed smoother acceleration, cant say its got more power but I do like it, I'll let youz know what mileage is like when I fill up next.

It's funny that we still use the word mileage but kilometreage just dosnt sound right, does it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...