Jump to content
SAU Community

Recommended Posts

Hey guys and girls,

I have noticed that my coolant gets very low, I fill it to max and the next day it is right down, but stays at that level...

What could this problem be??? Is it a blown headgasket??? If so how much will it cost for me to replace and what should I get if i will be running a t3/t4 turbo (or something like that - one that is for mid range grunt)???

Cheers,

Clakka

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/
Share on other sites

Hey guys and girls,

I have noticed that my coolant gets very low, I fill it to max and the next day it is right down, but stays at that level...

What could this problem be??? Is it a blown headgasket??? If so how much will it cost for me to replace and what should I get if i will be running a t3/t4 turbo (or something like that - one that is for mid range grunt)???

Cheers,

Clakka

are you talking about the overflow bottle near the battery?

if so, then you might want to check the actual radiator instead, more than likely when your filling the overflow up when cold, the fluid expands and is pushing it out of the overflow at the top of the bottle

doubt your gasket is gone if above is true

around $330 for a cometic gasket, plus install labour

will handle whatever you through at it

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432094
Share on other sites

You are forgetting the block o'ringing and the sealant. There's another $300 worth.

And a metal head gasket doesn't seal as effectively as a standard one.

ok so sealant is like $40

no O-ringing required ..

mine wasn't done

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432614
Share on other sites

Check for water leaks around the water pump, they have a little hole in them that indicates when they are corroded, they then leak from this hole. Much better than having no indication and sending the fan through the radiator.

If thats not it check all little hoses under the manifold and the little one that runs around the back of the head (drivers side).

I highly doubt its a headgasket or what not.

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432617
Share on other sites

Do they run that viton coating on the Cometic gaskets now? A few years back they were just a straight SS layered gasket.

im thinking they do. as far as i have seen they are single use items, which supports the coating idea.

from cometic website FAQ - http://www.cometic.com/faq.aspx

Why does Cometic recommend MLS gaskets to be installed dry?

Cometic Multi-Layer Steel (MLS) head gaskets go on dry because they are coated with a sealant. Each MLS head gasket is coated with a .001" thick viton rubber that is bonded to the outer stainless steel layers. Adding an additional sealer can hinder the performance of an MLS head gasket.

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432655
Share on other sites

im thinking they do. as far as i have seen they are single use items, which supports the coating idea.

from cometic website FAQ - http://www.cometic.com/faq.aspx

Why does Cometic recommend MLS gaskets to be installed dry?

Cometic Multi-Layer Steel (MLS) head gaskets go on dry because they are coated with a sealant. Each MLS head gasket is coated with a .001" thick viton rubber that is bonded to the outer stainless steel layers. Adding an additional sealer can hinder the performance of an MLS head gasket.

mmm, true.

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432659
Share on other sites

Do they run that viton coating on the Cometic gaskets now? A few years back they were just a straight SS layered gasket.

I run one on mine, had it fitted ~2yrs ago.

They do have a rubber type coating on them and it specifically states not to use any coating sprays.

Mines sealed well with no issues, daily driven, lots of short trips so its seen thousands of heat cycles.

Link to comment
https://www.sau.com.au/forums/topic/131421-leaking-coolant/#findComment-2432690
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...