Jump to content
SAU Community

Recommended Posts

Have a turbo from a r34 rb25 Neo for sale. includes accuator.

Been run with rb20 accuator on a rb20 for 8months then sat idle on my desk in my room for past 6. Worked ok till i took it off.

Great basic/cheap upgrade for rb20. Went pretty hard as its the biggest version of the rb25 turbo released.

Has nylon compressor wheel so it spools relatively early and has a steel exhaust wheel i think

Dunno what its worth really as dont really know the condition. Round 400 i guess.

offers and queries to pm please.

located in brisbane but willing to post at buyers expense.

cheers

Edited by rb20inside
Link to comment
https://www.sau.com.au/forums/topic/131523-for-sale-rb25-neo-turbo/
Share on other sites

mate im interested... how many ks has it travelled and also where are you in brizzy? have you still got everything id need to bolt it onto an rb20? just give us a call on 0438295165 when you can.. dont get to the net to often. cheers

Edited by carcrazycraigos

yer on a rb20 in a 180sx. I thought it was a pretty good match. yer it was definitely lagier than the standard but not too bad really. anyway boost is only a clutch kick away.

seemed to get up and boogy alright. never dynoed it but kept up alright with mates 180sx with rb25det, vg30det, 12psi, 3in exhaust. (which is for sale btw)

rso84: you have pm

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...