Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have just sent my car to the mechanic and he will be looking at it 2moro but i would be interested to see what you thought of the issue i am currently having.

Basically the car runs fine day to day and the only issue i have is that when the car is pushed it starts to rev fine, but then around the 3500 - 4000rpm mark its struggles to rev and feels unwilling to rev (almost like petrol is not gettin through properlly) and then towards 5500 - 6000 it seems ok again. But my friend and i drove it the other nite and he could tell straight away (also a 32 owner) and im starting to worry.

It has been this way for a while but because i dont rev beyond 3500 too often i didnt pay much attention..

So yeah, any ffedback appreciated

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/
Share on other sites

Oh ok, i was thinking it would not be a major problem as in general the car is fine and the problem is only under hard driving in that specific rev range as i said. My main concern that it was not major as in like a few cylinder loosing compression and a possible critical problem in the block. But i guess i just wanted assurance...

cause wen i want to drive faster now i generally drive to 3500 which its fine to and then change, but in first gear off the lights its more likely to rev clean right through to 6500rpm and the problem happens more in 2nd, 3rd, 4th

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435222
Share on other sites

Oh ok, i was thinking it would not be a major problem as in general the car is fine and the problem is only under hard driving in that specific rev range as i said. My main concern that it was not major as in like a few cylinder loosing compression and a possible critical problem in the block. But i guess i just wanted assurance...

cause wen i want to drive faster now i generally drive to 3500 which its fine to and then change, but in first gear off the lights its more likely to rev clean right through to 6500rpm and the problem happens more in 2nd, 3rd, 4th

I had the same problem with my r32 gtst. To fix it I made put the timing forward, the tiniest bit. and the problem was gone.

I checked all my coils and plugs and they were fine so this was a last resort.

It worked. *shrug* dont ask me why.

hope this helps

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435242
Share on other sites

I think there ia a tutorial, mabey sticky about the coilpacks cracking due to heat, check it out :ninja:

Here tis'

http://www.skylinesaustralia.com/forums/in...showtopic=32356

Hrrmm after reading this im not sure this would be my issue, ad the car only has a 3" cat back and pod filter...otherwise stock and has been all its life, i bought it in original nick with not a thing touched, and its never been boosted which seems to cause the problem with the coil packs due to the increased temp

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435257
Share on other sites

I had the same problem with my r32 gtst. To fix it I made put the timing forward, the tiniest bit. and the problem was gone.

I checked all my coils and plugs and they were fine so this was a last resort.

It worked. *shrug* dont ask me why.

hope this helps

Actually its interesting you say that, because my mate when i got the car helped me do first service and was suprised at the position of the timing as he used to hav a 32 and knew a bit bout them and did a lot of work on his car. Ill mention it to mechanic..

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435264
Share on other sites

Also I have noticed when the car is just started (cold) and then driving it is more noticeable, it just seems really unwilling to rev, its like ur asking to much and the fuel is just sputtering in as u build up some revs so i dont push it, but i know when i tested it (a year ago when buying) we cold started and it was more than happy to rev hard and it pulled hard and quick, i dont know what spark plugs the mechanic put in it last time also he didnt use synthetic oil (which he will this time after i asked him to) but i doubt thats related

Link to comment
https://www.sau.com.au/forums/topic/131546-engine-issue/#findComment-2435282
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...