Jump to content
SAU Community

Recommended Posts

Hey guys, got this headunit in my car from japan. Since then i have sold my car and have no need for it as work is in walking distance.

Anyway comes with all leads and plugs, the MD player doesnt work properly it plays but no sound. I have taken it apart and fiddled with it and had it worked but it keeps coming back and i dont really use MD's.

Looks awesome at night lit up, HUGE display screen lots of fancy features. Plays burnt cd's. I am after $100 + postage

pics will be up later but if you leave your email address i will send them out :P

post-28160-1156997504.jpg

post-28160-1156997569.jpg

post-28160-1156997714.jpg

Edited by MSS
Link to comment
https://www.sau.com.au/forums/topic/131558-kenwood-double-din-cdmd-headunit/
Share on other sites

Model is,Kenwood DPX-660MD

the md part plays, but there is no sound. I took it apart and jiggled some of the wires around and it worked fine. I have a newer model of this MD/CD player which i have up for sale but it is $300 in brand new condition.

Would like to have it sold today/tomorrow if possible :)

i am located in Glen Waverley

Edited by MSS
Model is,Kenwood DPX-660MD

the md part plays, but there is no sound. I took it apart and jiggled some of the wires around and it worked fine. I have a newer model of this MD/CD player which i have up for sale but it is $300 in brand new condition.

Would like to have it sold today/tomorrow if possible :)

i am located in Glen Waverley

what model is that and does it play MP3s?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...