Jump to content
SAU Community

Recommended Posts

Hi all,

I have some 17", 5 stud Stern lightweight 2 piece race rims.

They have no tyres on them at present.

Im not sure of the exact offsets etc but they will fit an R32 with 225/45/R17 tyres on thr fronts and 235/45/R17 on the rear with no problems.

The fronts have a slight dish and the reas even more!!! as the pics show. Good looking 17's if you wanna upsize from stockers

I have attached some pics , they have a little bit of gutter rash but are very light weight racing rims popular in Japan.

Reason for sale.... I already have wheels on my car!!!!

Anyways im in melbourne looking for around $550. Happy for you to come past and check them out.

Feel free to call me on 0422 206 869 or PM me. More than happy to negotiate on price.

post-15464-1156576229.jpg

post-15464-1156576281.jpg

post-15464-1156576329.jpg

Link to comment
https://www.sau.com.au/forums/topic/131803-stern-rims/
Share on other sites

Can you please find the exact offsets and widths? Quite easy to measure if it's not printed on the rims themselves. Try using this method:

http://www.rsracing.com/tech-wheel.html#backspace

Alternatively, take them to a tyre shop and they'll be able to measure offset for you in no time.

Also, in that 3rd picture, is that a chunk out of the edge of the rim or just flaked paint?

Edited by orbitor
Link to comment
https://www.sau.com.au/forums/topic/131803-stern-rims/#findComment-2441822
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...