Jump to content
SAU Community

Handbrake Shoes ?

konect

By konect,
in Four Door Family & Wagoneers

 Share

Recommended Posts

konect Mentor

konect

Posted
Posted

Hey gents and lady.

Getting my handbrake shoes changed tomoz and just wondering what they interchange with ?

I have a rear disk for normal brakes and drum for handbrake. Also car was NA from factory so I thought perhaps NA S13 ?

Any input would be greeeeat! Thanks :P

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/
Share on other sites
konect Mentor

konect

Posted
  • Author
Posted
s13's dont have drum handbrakes so that rule's that out. I'd be looking at s14's or r32's or something... but pull yours out and find something that matches them.

have you done urs? i remember something about you wanting to tighten the handbrake so thought you might have done them.

Im thinking R32 atm :S

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2445253
Share on other sites
konect Mentor

konect

Posted
  • Author
Posted
here is a pic of them installed (obviously without the disc on)

Turns out the shoes were ok but they were out of alignment and weren't grabbing the drum properly.

Had to get the rear pads replaced after been told by another place on saturday that they were fine.

Grrr

Also, do you notice a difference with the uras ones ?

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2447646
Share on other sites
someonestolecc Grand Master

someonestolecc

Posted
Posted
well... i bought the URAS brake shoes... they're the same as 32 and most other drum applications...

:/

I have to ask is there anything you can do with the uras ones you can't do with stockies or is the marketable factors of uras ones that they last longer or something?

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2451161
Share on other sites
Resin Rising Star

Resin

Posted
Posted
s14 is disc handbrake... just like sils

r32/r33 are the same

uras ones would be good for supposed performance enhancement

so is this true for the s14 disc brake ? Do they bolt on to the rear of the ceffy? direct replacement?...and are they twin piston likie the 32s and 33s?

thanks ...sorry for going off topic a bit

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2453098
Share on other sites
Hella Flush Experienced

Hella Flush

Posted
Posted
so is this true for the s14 disc brake ? Do they bolt on to the rear of the ceffy? direct replacement?...and are they twin piston likie the 32s and 33s?

thanks ...sorry for going off topic a bit

direct replacement

modify handbrake cables and thats it...

single piston s14/s15... not twin like 32/33

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2453553
Share on other sites
Hella Flush Experienced

Hella Flush

Posted
Posted

to me it looks the same... put it this way - it wont be a downgrade... youll have 5 stud and larger rotors

the other thing you can do

use the s14 stub axles and hubs... then get 32/33 rear rotors... and use something that runs disc handbrake that isnt single pot caliper...

OR just use your standard stub axles - use 32 hubs... you get to keep your drum handbrake setup... and use 32/33 rotors n calipers (what ive done)

direct bolt on! less muckin

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2457034
Share on other sites
Resin Rising Star

Resin

Posted
Posted

yea well at the moment i am staying 4 stud .........i already have wheels(which are awesomeand 4 stud)...yeas i could sell and go through all that agin but i really cant be bothered ....its cheaper to stay 4 stud at this point in time ...thats why i was just talking about callipers not hubs ...........in the end i may go 5 stud but ............but its just going to be a pain in the arse now ....

Link to comment
https://www.sau.com.au/forums/topic/132015-handbrake-shoes/#findComment-2457890
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...