Jump to content
SAU Community

Recommended Posts

hi all

Its a lovely day here in Perth (not,,,bloody horrible actually :wub:)...I went to turn my back window wiper on only to find that it did nothing :( I turned it onto the On position and all i could see was the top bit moving and the wiper and holder move downwards and thats where it stayed :D

Is this a sign that it has died :bunny: or that i have a wire lose or does something need tightening :D my first impressions where that if i could see it move that it was probably not dead...but with weather like this it is almost impossible to see anything out of my back window..and ideas would be greatly appreciated :bunny:

Thanks champs

Wildcat :D

Link to comment
https://www.sau.com.au/forums/topic/132377-help-wildcat-out/
Share on other sites

First thing would be check fuses

Other then that you'll have to do what i had to do for a full diagnostic, meaning take the cowling off the top and bottom of the steering column, there are 9 screws underneath, and check the 4 wire plug on the left of the steering column.

Then get an electrical type person to "close the circuts" and "check for eath" and "check for positive" with and without the switch being on.

then check the wiring running from the steering column, under the dash, under the drivers side foot/kick panel, under the drivers seat, under the drivers side passenger seat, behind the plastic under the back drivers side glass and then through to the back door.

then manually close the circut on the wiper motor to see if it works independantly from the switched wiring, get positive from somewhere else.

from that I determined that the wiring going to the switch from the old ecu was somehow lost in the spaghetti going into the power-fc, which is somehwere in the dash.

So I'm just going to manually rewire the switch, easiest solution for me :(

First thing would be check fuses

Other then that you'll have to do what i had to do for a full diagnostic, meaning take the cowling off the top and bottom of the steering column, there are 9 screws underneath, and check the 4 wire plug on the left of the steering column.

Then get an electrical type person to "close the circuts" and "check for eath" and "check for positive" with and without the switch being on.

then check the wiring running from the steering column, under the dash, under the drivers side foot/kick panel, under the drivers seat, under the drivers side passenger seat, behind the plastic under the back drivers side glass and then through to the back door.

then manually close the circut on the wiper motor to see if it works independantly from the switched wiring, get positive from somewhere else.

from that I determined that the wiring going to the switch from the old ecu was somehow lost in the spaghetti going into the power-fc, which is somehwere in the dash.

So I'm just going to manually rewire the switch, easiest solution for me :no:

:) oh my :rofl: that sounds like a long job...might check if its a fuse if not i will learn to have something broken :huh: thanks for your help champ

From your description it sounds like somehow the wiper arm has detached itself from the motor. I don't remember how Stag tailgates are put together but if you can get at it, check to see if a clip hasn't just fallen off or something. If you're not mechanically minded it might be worth taking it to a workshop and mention that you think this might be the case and ask them to look at it. Get someone to recommend a shop that won't take you for a ride (SAUWA club sponsors would be a good place to start) and possibly take a guy with you, from your sig I'm guessing you're female. Yes it's sexist, but some shops do still overcharge or outright lie to women if they think they can get away with it.

If you want to check it, turn the rear wiper on, then go to the back of the car. If you can hear the wiper motor going, it's not wiring, fuses or a relay so you can avoid the nasty job of getting into the dash and steering column :rofl:

I agree with Revhead.

It happened to me while I was borrowing my mum's r31 so i had to fix it for her.

Its is a bit tricky to get at and you have to concertrate on the links being the right way round or the wipers will try to stop up the top in stead of tucked away. :rofl:

If you want to check it, turn the rear wiper on, then go to the back of the car. If you can hear the wiper motor going, it's not wiring, fuses or a relay so you can avoid the nasty job of getting into the dash and steering column :)

ok i went to the back of the car if i lift the wiper up it is really loose and moves around if i let go of it, it falls to the ground. Then i put it back on the down on the window turned it on and you can see the round bit just before the wiper blade/holder itself trying to lift it up but nothing happens... :rofl:

Edit* forgot to mention that i can see the round bit actually rotating around and hear the motor going but the blade just wont move...driving me nuts jks

Edited by Wildcat
Sounds like it should be a relatively easy fix then :no:

Like a steering wheel down the pants?

:rofl: bit uncomfortable me thinks but i could probably handle that :huh: as long as it wasnt my steering wheel :) just jokes

back on topic im hoping that it will be easy enough to fix :O

Obviously not !! :O

:P should be an easy fix then........... for hubby (with supervision by the sounds of it)!

oh mister tangles :) i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :P but of course hubby can look at it and fix it and i can watch :laugh::laugh:

oh mister tangles :blink: i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :P but of course hubby can look at it and fix it and i can watch :P:)

You just make sure my dinner is ready for when I get home ... thats a good girl :wave:

Could you also please make sure the spare bed is made so I have somewhere to sleep tonight :P:laugh::laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...