Jump to content
SAU Community

Recommended Posts

Called around Repco, Super cheap auto and Bruson and none have Bendix Ultimates...

They do have at Burson for $59 front and back Bendix GCT.

Are these any good? I dont plan to go tracks just for normal street driving.

Also is machining the disks a must or can I skip that part?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/
Share on other sites

Also is machining the disks a must or can I skip that part?

Cheers.

Generally you only machine the discs if they have noticeable wear on them (use your fingernail from the edge, if there is more than a 1 or 2mm gap, they certainly need machining, or possible replacement.).

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2466883
Share on other sites

Generally you only machine the discs if they have noticeable wear on them (use your fingernail from the edge, if there is more than a 1 or 2mm gap, they certainly need machining, or possible replacement.).

Can any mechanic workshop machine the disks for a skyline or must i go to some special one?

Also how much is the process?

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2466962
Share on other sites

i recommend getting better brake pads matey... as you all know we all spend how much money to make our cars go faster, but sometimes very little on stopping. its a performance car, and better brakes mite save your life or someone elses life.. just my 2c >_<

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2466981
Share on other sites

i recommend getting better brake pads matey... as you all know we all spend how much money to make our cars go faster, but sometimes very little on stopping. its a performance car, and better brakes mite save your life or someone elses life.. just my 2c >_<

Well the car is stock and wont be seeing the track any time soon... after all they are just brake pads...

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2466999
Share on other sites

Don't use greenstuff try the ferodo pads T2000 better for performance driving plus you can get the pads and discs macnined at Race Brakes Sydney.

The disc rotors may also need machining because often the rotor will wear on uneven or on a taper so machining will fix that and make the surface flat for the pads to bed in properly.

Edited by PMATT
Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2467100
Share on other sites

yeah thats pretty cheap, we do em for $26 per rotor, but add to that half our labour if your not getting pads done at the same time.

through my work you get Ferodo Excel pads (bendix advance equivelant) with rotors machined, all fitted an done for $201

just to give you a reference

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2475512
Share on other sites

iam running the bedix ceramic pads at the moment, lacking in the performance area but absolutely no brake dust. The last pads i had were the bedix metal kings or something along those lines with heavy metal compound, i found these very very good for stopping but shit load of brake dust and also being a metal pad they will wear and tear your disk alot quiker

Ryan

Link to comment
https://www.sau.com.au/forums/topic/133139-need-brake-pads/#findComment-2476555
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...