Jump to content
SAU Community

Group Buy # 2 Arospeed Adjustable Cam Gears


Recommended Posts

G'day guys.

I have had heaps of people PM to do another group buy, so ill do it for my fellow members.

These are from Import Car Parts Plus in the USA.

GB: START 07/09/06 ENDS 10/10/06

What i found was some Arospeed USA RB20/25/26 Cam Gears.

Here's all the info on them - make sure you read all of this cause it'll probably answer all your questions.

These camgears are good for a RB20, RB25, RB26.

To keep the price down, I need to order 10 sets thats 20pcs in total. (Come only in Blue & Red Colour)

How to get onto this great deal"

You can do direct deposit into my account then I'll express post them to you. Both ways are fully tracked so they won't go missing.

Express post cost an extra $10 nation wide.

Cost Price of the cam gears is $170 for the pair, or $85 for 1 pc.

So total cost for a pair will be $170 + $10 postage = $180

This gb will end in about a month or before if we can get the numbers.

Ordering To order a pair, just put a post up here or you can PM or send me an email at [email protected] with your details.

Feel free to ask me any questions.

Also this is a price break i was given if more than 10 pairs are ordered.

10 - 15 pairs $160

15 - 20 pairs $150

20+ Pairs $140

So who wants to start the list.

Edited by r33kid
  • Replies 223
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'm interested, just waiting on feedback from the people from the last group buy about quality,etc.

I also take it we pay when they're ready to be sent off?

Edited by NV N01

I bought a set for my RB20 in the first GB. Fitted them yesterday, re-adjusted ignition timing and has made a very noticeable difference. Car is easier to start cold, HEAPS better mid range, actually noticable on the road. Will be hitting the dyno next week for fine tuning but the settings i gave it work a treat. Would recommend

Edited by kjb_r33

you can count me in for a red pair to suit rb20. whens the coin due at the end of the buy?

Edited by fredzz32

Update

1)NV N01 * IN FOR A PAIR

2)MUCK * IN FOR 1 GEAR

3)Lazy-Bastard * IN FOR 1 GEAR

4)fredzz32 * IN FOR A PAIR

5)robbo33 * IN FOR A PAIR

6)Cillham * IN FOR A PAIR

7)Kinell * IN FOR A PAIR.

Edited by r33kid

New Update

1)NV N01 * IN FOR A PAIR

2)MUCK * IN FOR 1 GEAR

3)Lazy-Bastard * IN FOR 1 GEAR

4)fredzz32 * IN FOR A PAIR

5)robbo33 * IN FOR A PAIR

6)Cillham * IN FOR A PAIR

7)Kinell * IN FOR A PAIR

8)XZLA.8 * IN FOR A PAIR

9)frother * IN FOR A PAIR

10)BAMR33 * IN FOR 1 GEAR

11)DJRIFT *IN FOR A PAIR

Edited by r33kid
New Update

1)NV N01 * IN FOR A PAIR

2)MUCK * IN FOR 1 GEAR

3)Lazy-Bastard * IN FOR 1 GEAR

4)fredzz32 * IN FOR A PAIR

5)robbo33 * IN FOR A PAIR

6)Cillham * IN FOR A PAIR

7)Kinell * IN FOR A PAIR

8)XZLA.8 * IN FOR A PAIR

9)frother * IN FOR A PAIR

10)BAMR33 * IN FOR 1 GEAR

So as we stand now..we're down to $170 delivered via Express Post..

Seeing as there are now 10 people?

Just to Confirm.. Are they either Red/Blue or are they Red and Blue?

So as we stand now..we're down to $170 delivered via Express Post..

Seeing as there are now 10 people?

Just to Confirm.. Are they either Red/Blue or are they Red and Blue?

These come soley in red colour or blue colour not mixed.

Last gb we got it down to $150 pair

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...