Jump to content
SAU Community

Recommended Posts

Im possibly looking into selling the cefiro.. its come a long way since i bought it off Darren Appleton..

PRICE $15,000 will consider swaps

Specs as followed

Engine:

-RB20det in perfect health, full compression within factory specs, possibly rebuilt in japan but i havent pulled it open to check.

-GTR frontmount cooler with piping kit and silicon hoses, only quality here.

-GTR fuel pump

-new timing belt

-fully maintained and fluids changed more often then most road cars

-Remapped ECU by Jeff from The Speed Lab

-KKR 430 Turbocharger and dump pipe

-Stainless steel V band Dump pipe with Apexi 3 inch racing exhaust

-good cond 5 speed RB20 manual with 5 puck "Drift Clutch" from Extreme clutch

Susp:

-Cusco camber arms

-Rack spacers for more lock

-JIC adjustable coilovers with pillowball tops, fronts camber adjustable (8kg front 6kg rear)

-Rear Camber arms

-Locked hicas

-GTR Sway bars all round

-Alloy cradle bushes

-Trust brake pads

-Locked diff

Wheels:

-17X9 +30 Gmax Wheels in White

Exterior:

-Uras style body kit, not the best cond however the majority of it is still in one piece

-Vented bonnet

-GTR Metalic Purple paint (r33 GTR paint code)

-Flared front and rear guards

-Update model rear lights, along with front lights and grille

-Uras front parkers

-GT Style wing with adjustable downforce (acctually works well on the track)

Interior:

-Various blitz, Greddy and so on guages, Boost guage and assorted.

-GTR Drivers seat

-4 Point Harness

-Cefiro Passengers seat

-Full interior trim, Everything works, Has jap mini disk player and aftermarket speakers, have never bothered to change this.

-momo steering wheel

Notes: This car is in pretty good cond throughout, I have never really complied or registered it due to the fact i already have several daily drivers and i cant be bothered spending the money only to get defected.. This car makes 200 rwkw's and theres more power in it yet, the responce and torque for an RB20 is quite phernominal and with the right driver this car would be very competitive I have placed well and even won comps with this car also. That said spend some money complying it and it would be an awesome street car also.

im not interested in selling parts off it, ,either it all goes or not at all. I dont need to sell the car i'm just testing the waters.

Pics.

suesphotosamndceffy020kb0.jpg

66322125gyq7twoc060902kamakazie652or1.jpg

mallala0603millen148boa9.jpg

dscn2483en0.jpg

Interested parties can either PM me or contact via email on [email protected]

Simon

Edited by simon-ae86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...