Jump to content
SAU Community

Recommended Posts

Hi,

I live in Huntsville, Alabama in the US. I will be importing an R32 soon and want to know which would be a better car. I plan on, if I get the GTS-t, putting in an RB26DETT and eventually getting it up to GTR looks. I will primarily be drifting and heading out to the local drag strip. Which car would be a better buy, an R32 GTR or an R32 GTS-t? The GTR would cost me more at first, but will be AWD. The GTS-t would cost me less at first, and I can upgrade in stages, but will be RWD. I assume that having it RWD would be better for drifting, as AWD is inteneded to reduce traction loss, thus hindering ability to drift. However, I have read that with the GTR's AWD system, it only gives the front wheels power if it detects loss of traction in the rear wheels, and it can be locked in either AWD or RWD modes. Is this true? I would just like some simple advice on the subject.

Thanks

Mazikowski

EDIT: Just on a side note, I am about 6' 2" tall (so around 2m?). How would headroom in the car be for me? Would it be overly tight?

Edited by Mazikowski
Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/
Share on other sites

well it really depends.. if your going to use it more for drift or drag.

it will be ALOT cheaper to go the route of the GTR. Running conversions and doign things in stages will cost you an arm and a leg in labour/time/parts

plus.. who doesnt want a gtr :P

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2483860
Share on other sites

Go the GTR! You can easily turn off the AWD by pulling a fuse or putting in a switch to turn it on or off.

It will be more expensive initially but you will spend more to get the GTSt to anywhere near the same dynamics in the long run.

If it does not have a sunroof you should be right height wise or you could fit lower seats if not.

Thought you guy's could not have Skyline GTR's there in the land of the free :P

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2483956
Share on other sites

well, you cant import them really because of laws in states with major ports, but if you import the car w/o engine + engine separate, it can be done, just assemble it in the destination state and off you go... besides, it helps to have some connections :dry:

I should be able to get a GTR for around < USD25k or a GTS-t for < USD15k

plus.. who doesnt want a gtr :O

this is true... OH HOW TRUE THIS IS!!!! lol, sorry, had to get that outta my system

Edited by Mazikowski
Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2484197
Share on other sites

If it is SPECIFFICALLY for drift, I'd go GTS-T. Lower purchase price, less weight (AWD hardware is HEAVY!), cheaper to replace parts and body panels (probably).

If it's a powerful multipurpose drag/track street car, I'd go a GTR.

I'm 6ft4 (with a heavy build), and I fit in my R32 GTS-T just fine. But for enthusiastic driving, I'd budget for a new drivers seat and steering wheel - the standard items are under and over sized (respectively) and are pretty much useless for people my size! The R32 GTR seats are apparently much better, but alas I have never driven one and hence cannot comment.

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2489230
Share on other sites

If it is SPECIFFICALLY for drift, I'd go GTS-T. Lower purchase price, less weight (AWD hardware is HEAVY!), cheaper to replace parts and body panels (probably).

If it's a powerful multipurpose drag/track street car, I'd go a GTR.

I'm 6ft4 (with a heavy build), and I fit in my R32 GTS-T just fine. But for enthusiastic driving, I'd budget for a new drivers seat and steering wheel - the standard items are under and over sized (respectively) and are pretty much useless for people my size! The R32 GTR seats are apparently much better, but alas I have never driven one and hence cannot comment.

Alright, thanks for the info on sizing. I will most likely be using it for both and maybe even some... I guess it would be like circuit? ... racing. Knowing that I can switch between AWD and FWD with a switch ( gotta install first, I know ) makes me wnat the GTR, a bit more power and better car for the most part. Now, to get the money >_<

Thanks

Mazikowski

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2492245
Share on other sites

Id go the gtst personally, cheaper parts and parts are easly found. with the extra money you will have left if you bought a gtst, you could put it back into your car. dont let the GTR badge fool you I have seen plenty of gtst beat gtr in races on the street and personally, there's not substitute for hanging that arse out when you feel the need to. :O

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2492712
Share on other sites

why would it be less expensive? I would end up putting an RB26 in most likely.

I will have to do some more research into it, but I still have a while to go before I would be fully deciding.

why bother with the rb26, go the rb 30, with rb25 top end, its stronger and can produce big hp. and go 1 big single turbo rather then twin turbo.

with the bigger engine, and reduced weight (not having a GTR) = :)

Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2493346
Share on other sites

but how hard would it be for me to get a 30 with rb25 top end? Like I said, It will take some research... thanks for the advice all the same

::EDIT::

Although it has a larger displacement than the RB26DETT, maximum possible horsepower is less, as the RB30 block lacks the RB26 block's internal cast-in bracing, and consequently cannot rev as high due to harmonic issues at ~7500RPM. To compensate, the RB30DET produces more torque at lower revs.

from http://en.wikipedia.org/wiki/Nissan_RB_engine#RB30

Edited by Mazikowski
Link to comment
https://www.sau.com.au/forums/topic/133936-gtr-or-gts-t/#findComment-2495813
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...