Jump to content
SAU Community

Recommended Posts

Hey people i'm concidering parting with my R34 4 door. I've owned in for the last 18 months i am the first owner in Australia. Car is in immaculate condition you will not find a cleaner more well looked after example anywhere! The car is serviced every 5000kms with only the best of the best, is garged every moment it is not being driven and is washed weekly. All mods have been done in the last 6 months, some actually in the last week. All mods have been professionaly fitted by high quality SA work shops such as Doyle crash, Exhaust technology, JAZMAC performance etc.

Car : Nissan R34 4 door Skyline GTT

Year: 1998 (dec)

Colour: Platinum Silver

Trans: Triptronic (5 speed)

KM: 57000

Body:

Factory Xennon headlights

Customised Nismo Aglis Front bar

Nismo Side skirts

Nismo GTR style Rear lip

Rear gaurds lipped and slightly rolled

Clear side indicators

20%tint all round

Engine:

RB25DET Neo

Custom front mont intercooler with custom piping (runs back through the stock holes)

Custom 3 1/2 inch Exhaust Technology exhaust with 3 1/2 inch high flow cat

Jun BL rear muffler with twin jap flutes

Nismo Radiator guide

Wheels

Genuine 19 inch lenso S7 modify wheels 19x8 +30 all round

Tyres have 75% tread

Custom hubcentric 15mm spacers (front)

Custom hubcentric 25mm spacers (rear)

Suspension

Lowered Sports springs

Stereo:

Factory option 8 speaker sound system (bose)

12-09-06_1701.jpg

DSCF0304.jpg

Price: $27750 ono

Sean

Edited by mxtcy
Link to comment
https://www.sau.com.au/forums/topic/135368-r34-4-door-eoi/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...