Jump to content
SAU Community

Skyline Got New Bits,intercooler Finaly On


Recommended Posts

Here you go,

thanks go out to ydawak and my brother chinna, did a fantastic job, the car goes dam hard, still have some nigglles, as the computer is not tuned.

here are some pics.

ALSO need some help in relation to this

http://www.skylinesaustralia.com/forums/in...=135917&hl=

post-27760-1159143878.jpg

post-27760-1159143900.jpg

post-27760-1159144095.jpg

Edited by WogsRus

yeah the tune is october 3, but kutzie was a bit weird last night, i asked if i could hang around to watch and he was like, humm yeah not sure, what eva.

MY blody problem is now, for some reason, the car missfires at 4500-5500 rpm and then nothing goes fine. who know what it is. I have already done the plugs and coils, will redo tonight.

Also going to check for vacume leaks and do my AAC valve and reset the computer and go for a thrash to make sure the computer sets up OK.

yeah, would think the plubs, they gapped to 0.8?

Alsom R33's do have a flat spot through the mid range so maybe that's what you're experiencing? If you've got a new cooler and more boost i'd say that's what it is. A tune should sort it out if you've got a SAFC or better.

Toffy, what else you got lying arround. I actually have a series 2, but the series 1 front, so i ave no ignitor, BUT if you have one, i'll buy it as i want to swap to a wasted spark ignition system. SO gimemememememe

I went there, great bunch of guys, certainly know their stuff, that is where i got teh new pump from. The price for spplitfires form there is more then on the net, but i can get a whole system setup in wasted spark for about $150 but i need an ignitor. so if anyone has one i'de love top buy one.

BTW Toffy, found that cat yet? love to have it before tusday as that is my dyno day.

  • 1 month later...
yeah the tune is october 3, but kutzie was a bit weird last night, i asked if i could hang around to watch and he was like, humm yeah not sure, what eva.

MY blody problem is now, for some reason, the car missfires at 4500-5500 rpm and then nothing goes fine. who know what it is. I have already done the plugs and coils, will redo tonight.

Also going to check for vacume leaks and do my AAC valve and reset the computer and go for a thrash to make sure the computer sets up OK.

Hi,

I installed a FMIC on my old R33 GTS-t with exhaust and pod filter at the same time...

Never really got to the bottom on the flat spot and misfiring at 5-6K. Re-gapped plugs to smaller gap, maybe around .7 or so and was just left with flat spot...

Had a feeling the flat spot happened after the modifications, but never tried to reverse the changes, I've heard this is fairly common although there is anicdotal evidence that a power fc plus full re-tune fixed...

I have already tuned mine, but still no good, a bit flat, so who knows. I presume the ECU is going into R&R as the SAFC II can only do so much, will see, might have a MINES ECU comming soon. Also my coils are shot, so i need to fix that first, which will also improve response and power as a better stronger spark means better ignition ect. Also need a good boost controller, mine is all over the place.

My gap is down to 0.6mm just so it stops missfiring.

So how is your car going?

I have already tuned mine, but still no good, a bit flat, so who knows. I presume the ECU is going into R&R as the SAFC II can only do so much, will see, might have a MINES ECU comming soon. Also my coils are shot, so i need to fix that first, which will also improve response and power as a better stronger spark means better ignition ect. Also need a good boost controller, mine is all over the place.

My gap is down to 0.6mm just so it stops missfiring.

So how is your car going?

0.6 u wouldn't want to go any lower :huh:

As for the MINES ECU, i dont know how much your paying for it but if its over $100 then i really wouldn't worry about it :no:

Just wait till u can a PFC ($800) and stop spending money on other crap that you dont really need :wave:

no doubt it is the coils!!

has happened to me 3 times now... next time will be wasted spark! (but I have 3 sets of coils now, should be able to find 6 good ones!)

:) u can never really have enough hey Todd!!!

Well i got the ignitor and new loom comming for $80 so that's sweet. Got the AU coils and leeds to suit skyline, $100, now i just need to wait for all the bits to arrive, and then put it all together.

Not bad for $180, plus my time.

The Mines ECU is $250, i am not going to get a PFC ever, don't like them, Wolf all the way, but need more money first. So i figured i can get the ECU and then sell it later, so it gets rid of the dam R&R.

As to the sparks, yeah .6mm hay, and still only about 8-10 psi boost, as i also need a new boost controller, dam turbos, always more money. LOL.

Well i got the ignitor and new loom comming for $80 so that's sweet. Got the AU coils and leeds to suit skyline, $100, now i just need to wait for all the bits to arrive, and then put it all together.

Not bad for $180, plus my time.

The Mines ECU is $250, i am not going to get a PFC ever, don't like them, Wolf all the way, but need more money first. So i figured i can get the ECU and then sell it later, so it gets rid of the dam R&R.

As to the sparks, yeah .6mm hay, and still only about 8-10 psi boost, as i also need a new boost controller, dam turbos, always more money. LOL.

Different strokes for different folks dude,

interesting that you want to go WOLF over PFC, can u shed some light on that why, personal prefernace or sourced information for your current supporting mods???

I've known a couple of peeps to run a WOLF and after they got sick of spending money to get it right, they pulled them out and bought a PFC.

WHen you weigh up the cost different you would actually be infront if you were to buy a PFC ($800ish brand new) compared to new WOLF or even 2nd hand gear!!!

With the MINES ECU just make sure it really is a MINES cause i've known 3 people now that have paid extra for cars cause they had a "MINES" ECU and all they were was the front cover and seal.

Crack em open and they were stock as a rock inside :rant:

Hopefully once you get the extra spark mod done you will be able to regap the plugs (to atleast 0.8) and wind a little more into the old girl!!!

Have you done the high boost mod yet or not going to bother???

Give me a yell if you need a hand with anything :whistling:

GMB

yeah it's a proper mines tuned ECU, got the serial and seen inside, but not sure if i will get it as yet.

Why Wolf, well i have worked on these before at uni, and the new plug and play V5 is GREAT, much more simple to use then a PFC, full laptop tuning, and loging. You can get rid of the dam AFM ect ect. I simply like these more over a PFC. new V5 has boost controll as standard and a whole heap of smaller features. I know the older vertions of WOLF sucked a bit, splicing looms ect, but the new ones are the BOMB.

As to the spark, well it's hard to make power down low, with crap spark, the car is great up top, but when i pulled the spark out to see what it looks like, you could hardly see it. LOL. SHITE.

Still need a decent boost controller, runing stock in hi mode. But seeing as it is a bleder type, depending on outside temp, the boost is anywhere form 8 to 12 psi. LOL, big FMIC tends to do that.

Looking at a GIZZMO, looks good, works well, but also like the HYBRID EBC. Not sure, need more cash.

im betting your midrange problem has something to do with the .6mm gap :D , i havent even touched the plug gap in my 33 but i have bought new coilpacks, if you have a pod that can also cause the flat spot so make a cai of some sort, have you tilted your bonnet up at the rear yet? :D

(im gunna gap my plugs this w/e to .9 just to see if it makes any difference in performance, reset my timing(bcause its been retarded for ages) and make myself a waterspray kit and a cai of some dodgy description ;) , then its off to the dyno for a power run to see what its makin :P ), ill post up the dyno figure when i get it :)

yeah i recon the gap does not help. Whay plugs did you buy, splitfires? I finaly got my bits together for my wasted spark. When i pulled my coil out to see the spark, i could hardly see it. LOl. so this will definatly help.

I have no CAI, yet to make it up. But i have some good ideas as to how i want to do it.

AS for the bonnet thing, well no, i don't like the look of it, but hay.

Can't wait to see the water sprays, i'll pinch your design. LOL.

Keep us posted

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...