Jump to content
SAU Community

Recommended Posts

ok ppl myself and a few others so far are taking this on to do a SPECIAL TRIBUTE CRUISE to the man the legend Peter Brock

this will start at Krispy Kremes in Narre Warren Sunday the 22nd of October and will cruise to the main racing spots of Melbourne Sandown (though i doubt we will be able to park inside the gates) Albert Park and finally Calder (once an adequate car park is chosen) excluding Phillip Island for a few reasons its too far to go all the way from Calder to Phillip Island and also cause of the police attention alot of cars on the island even outside of racing w/e's it gets.

i will be trying this week to do an number of tasks to get this organised as a sucess and am open to sugestions

im looking for ppl to help out as well make things run smoothly as its a big ask of a short time

so here it is

WHEN Sunday 22nd of October 2006

WHERE Krispy Kremes Narre Warren Narre North rd Fountain Gate Shopping Centre

TIME 11am for a 12-30pm depature

other details to be confirmed as things come together i will update on it and let you all know

i want this on all forums anyone can think of that has some sort of following in melb ford skylines ect ect ect if you look on the ford forums there feeling it just as much as the holden drivers and supporters are its not a loss just for holden its a loss for motor sport

LETS DO IT FOR BROCKY

cheers

chris and team

its with great pleasure i can announce our first update for the event

over the past week alot of emials and intrest has gone out and come back the team is hard at work getting this event as much upto code as possible id like to thank all who have in some way big or small helped this event even get off the ground to start with and there is still many hard days ahead but keeping at it as we have has been a fantastic effot well done to you

the following things are currently underway that can be revealed

-the Brock foundation is now onboard for this event

-the police are supporting the day

-we are obtaning a permit for the event

-are in the midst of clearing permissions for car parks for the event

thats it for now but still other things are going ahead that would be unfair to confirm to date

cheers

chris and team

hey ppl lol yes you can cruise through the drive thru but probly wont have to we are trying to get a sponsorship from KK for the day.

as for the albert park lap it will be from the kingsway side to the lights and then around into the footclub car park as it is quite large for the no# we are expecting from there to at this stage calder then down to the final meet and what might be a fundraiser bbq in Hurstbridge.

anymore questions guys and please dont hesitate to email

[email protected]

smokeydj you should be ashamed of yourself you f**king scum!

We have checked up on you and found this to be full of shit!

I just rang and spoke to the Peter Brock Foundation, Denees Denham she is a Director with them Apparently they know NOTHING about this..

Chris you better f*cking come clean.....

They told you they wanted NOTHING to do with you....SEVERAL TIMES.

How much more bullshit are you going to spin....

Details can be found at Ausrevs here:

http://www.bubblisious.com/ausrevsbeta/Fil...3066&page=3

As well as being banned from Aussiev8:

http://www.aussiev8.com.au/showthread.php?t=7993

smokeydj you should be ashamed of yourself...... :(

Edited by R33_STEALTH

YAY!!!!!!!!

I get to ban someone, its been a while.

smokey_dj, seeing as though your trying to scam people, i'd say you'll be checking this thread regularly.

You have till late this arvo to explain yourself, or i is gonna take the ban stick to y0 a$$!!!!!!!!!!!!!!!!!

He copped a nice grilling from the start at Ausrevs, all where suss on it....

I certainly gave him my 2cents worth when he first posted. :(

pffft, asif hold a "tribute" cruise starting at Krispy Kremes...so so shallow.

...i'd certainly like to see smokeydj's excuse tho.

Please....

Smokey _dj, i cant beleive you're still continueing asif nothing is going on....

Anyone interested in the full story and the exclusive scoop on the truth exposed can jump onto AusRevs under the Un-official section and see for themselves.

...I'll leave it at that.

  • 3 weeks later...

alright alot of ppl have been asking myself and a few others working on this with me if this is still a goer unortunatly due to way too much red tape and alot of legal reasons this cannot happen as planned for this sunday but once reconfired will be back on the books as soon as new word is released sorry to have to make this so late notice but only got official word at 10am this morning and not too happy about it to be honest

as stated its not cancelled just postponed and looking to be aywhere between mid december and mid feb for the new date so just stay tuned and when we know youll know.

we are expoing many differnt avenues to make sure this dosnt happen again we are even looking at a few location changes depending on how things go

anyway thats it for now

thanks

chris and team

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...