Jump to content
SAU Community

Recommended Posts

today i had my best mates over (aka boys in blue) because some one rang them saying that i was goin around doing burnouts, they said some one followed me home etc. only problem being i hav no licence or rego an i was at the bay.

parents where home an they said to them the only reason there not towing it was because the exhaust was cold (prooved it wasnt started) an that the where sayin that i hadnt even opened the car today.

just wondering if anybody else has had this problem b4 an what happened after they left if the person that made the false report got cained or what

Link to comment
https://www.sau.com.au/forums/topic/137026-anybody-had-a-false-report/
Share on other sites

tell em to piss off unless they come up with the name of the person who dobbed ya in 1 they wont get to even see the car in the garage if i know im in the right 2 buy ther time they come back with the tow truck my lawyer would be standing in the driveway and 3 i would go ahead with harrasement charges the minute they tried to hook the car up to the truck if you know ya did nothing wrong then stand firm it;s up to them to prove it was you ie photo;s video ect ect

only next street over wen i ride my bike an one that rings them every so often for my car havin no rego an being on the rd but cop said it wasnt some one that lives on the street but some random that was in the area that followed me home

but cop said it wasnt some one that lives on the street but some random that was in the area that followed me home

if it were that person it that would be his/her response. He has to protect the identity of the dibba dobber cindy/liar wet ya pants at kindy.

Just for good measure go grab a shoe box, have you and a couple of your mates take a dump in it cover it with a tinny little bit of news paper light it up, ring their door bell and watch. *jk*

^^^ gold ill wait a couple days an see wat happens dont now if it was prob the same ppl that called the cops the other day because our music was to loud at my sister 18th they said the same thing as today wasnt a neighbour but sum one from streets away

Yeah I had this happen to me. Then 2 cop cars came to my house and defected me. Makes me wanna (but I wont) file a fake report against a cop and see what happens, I mean hey they seem to believe anyone who calls them especially if the person they are reporting is male young and drives a fast car, how about the f@#ken burden of proof.......

Edited by kounj002

I've seen planty of cops hooning in my day. 2 that come to mind.

There used to be a bit of a reasonable dipper down Reynella that is now a small overpass for the southern expressway.

2 male young cops flying down it grins from ear to ear whooshing past me doing an easy 90km/h, hit the bottom sparks etc as they car is sucked to the ground....

And another time when I was younger. I did a bit of a wheelie in my old 4.1ltr Cortina 4speed, cops made chase pulled me over gave me a warning. As they were leaving they did a U turn and flattened it, big wheely and a bit of a snakey. The old 6cyl Commo's don't like lsd too much. Dies off pretty quick as soon as it got straight. :P

got a neighbour that gives u any dirty looks now and then?

My neighbours hate me. Literally. They had a go at me because it's too loud and that there were kids on the road playing and stuff..

FFS you moron, the road is NOT a playground, your f**ken kids shouldn't be on the road to start with..

Jackass, having a go at me because i was scaring the kids :S

^^^ lmfao at ur pic thingo let it settle for a month or so then he wont now i got told who it was then i sort it proberly shit in a box idea is pretty good. was washing car just then an it drove past an i chucked a wave an a smile they hated it. ill kill them with kindness first

was washing car just then an it drove past an i chucked a wave an a smile they hated it. ill kill them with kindness first

they would love it if u played that card. The more they get pissed off, the more nice u are. Take em round a box of roses and tell em u hope there are no hard feelings :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...