Jump to content
SAU Community

Recommended Posts

HEy all,

i just watched the first series of initial D, and i am bloody hooked, i was wondering if anyone has the 2nd series and the movie... that i can lend, borrow or buy.....

i've done a search.. on this forum.. found some places that recommend where to buy it.. but couldnt find it on the website...

better yet has anyone got dvd rip?? i only got the first series...

Link to comment
https://www.sau.com.au/forums/topic/13776-initial_d-lovers/
Share on other sites

Drivebai,

I've got it all burnt to CD-R's - Stage 1 & 2 (i.e. the first and second series) and Stage 3 (the movie).

They can be found on Kazaa if you do a search, but I'd only recommend using a broadband connection to download them. Or you could leave your PC on and connected overnight, etc. if you're really keen.

I work in Parra and live only about 10-15mins from there, so if you want them we can probably arrange something...

Nick T

Link to comment
https://www.sau.com.au/forums/topic/13776-initial_d-lovers/#findComment-276311
Share on other sites

Gentlemen, I can get all Initial D series on DVD which includes DVD 1 - 3 of Stage 1, DVD 1 - 3 of Stage 2, Stage 3 which is the movie (1 DVD), Extra Stage (1 DVD) this is the one with the 2 girls who own the sil eighty, and finally Battle Stage (1 DVD) which is all the best street battles from the series. Each DVD costs $29.95 but I am sure if you take the full kit I could do a special price.

Link to comment
https://www.sau.com.au/forums/topic/13776-initial_d-lovers/#findComment-278175
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...