Jump to content
SAU Community

Recommended Posts

Hi Guys, well this is my car.

skylineig3.jpg

I am thinking about either painting my rims white, black, gunmetal or bronze OR putting them on the family magna wagon and getting myself some new rims...

I am interested in seeing what others have on their 32's and how big you can go. CAN I FIT 20's under there??

My current rims are 18x8's (not sure of the offset but I believe correct - maybe 35) and I have had to trim the rear guards right back to 'minimise' scrubbing. Can I get a wider tyre on if I get a different offset (taking them in further) or will that just cause more problems?

Anyway, this is as much for me as for every other R32/Skyline lover out there... Post your pics up and give your opinions!

Thanks guys!!

Todd

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/
Share on other sites

get rid of em mate, put them on ya commodore. lmfao.

20s...umm possible, but mods to ya guards for sure, and must get low profile tyres, probably something like 205x30xR20 for front, and 215x30xr20 for the rear.

i hate to see holden wheels on jap cars, or japwheels on aussie cars, just doesnt go together.

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2587613
Share on other sites

ratedGTR - they arent holden wheels, they are just an after market wheel mainly produced by BSA. also 30 series rubber for 20s is rare and only comes in 225 and wider.

CATKICKER - ive got 20x8 on my car and they only scrub a tiny bit when i go over big dips in the road at decent speeds, but ive got GTR front and rear guards. you could probably fit em with the right offset, camber, tyre size and height.

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2588058
Share on other sites

Cool... well since mine are 18x8's and rarely scrub, if I were to fit some 20x8's with a 30 profile tyre, it should technically be the same width and rolling diameter.

I honestly have not seen 20x8 before, only 20x9's. what are yours? can you post up a pic? I can't see to well in your sig...

raterGTR, post up a pic of your car/wheels.

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2588179
Share on other sites

no it wont be the same rolling diameter

you can fit 22s if u wanna keep the car sitting like land cruiser

but the problems start when u lower the car

because the wheels will need to sit inside the guards for it to look any good

my wheels are original AME modelarts, they are a light weight 3 peice jap rim.

cant buy em anymore cause they stopped making em years ago

74953993_85513b0a85_o.jpg

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2588236
Share on other sites

see now that is tough!

how does it handle with 20's? Mine sits about the same height (just slightly heigher, which is fine for me and my daily driving)

i am just not sure if it is worth the trouble getting 20's just to say i have 20's... maybe it is but 19's would still look big! It's not like the 18's look small (well the do compared to yours :D )

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2588278
Share on other sites

18's look small compared to that for sure, but there are still some nice 18's out there, and the cost for them (and tyres) wont be as bad

Ive always though black powdercoated rims like your current ones wouldnt look to bad on a silver R32 :laugh:

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2590375
Share on other sites

handles like shit with 20s lol

nah its not too bad obviously it would be better with smaller rims.

i want to go lower because there is still a shit load of ground clearance

having the car sitting the way mine sits now wont happen on a GTSt

unless you get 20 x 7.5 or something really thin

and have heaps of negative camber

Link to comment
https://www.sau.com.au/forums/topic/138932-r32-wheels/#findComment-2590982
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...