Jump to content
SAU Community

Recommended Posts

on my new engine, i am runnning a new thicker radiator with standard shroud and engine fan, also front mount and the performance in 30+ degrees is still good. water temps are down, which in turn keeps everything under the bonnet that bit cooler. I would recommend covering the basics i.e. good cooling system and intercooler before setting up some sort of spray system on a daily car.

Having said that, you should still keep the boost low on a real hot day on your daily just as a common sense thing.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Once engine coolant temps get up the ecu begins to retard ign. timing. :O

Unsure what coolant temp that is on the stock ecu but on the R33/R32 GTST pfc's its from 80degree's.

The GTR PFC begins retarding ign timing from 90degree's.

Regarding the stock temp guage.

The stock water temp guage is basically a 3 stage. Cold, operating then HOT.

For example mine see's half at ~70 degree's right up to ~110degree's where it only just starts to move up towards the H.

On hot days in traffic without the a/c on I generally see around 90degree's. With the A/C on in traffic it gets up around 95 and has seen 100degree's on those 40+degree days. Once the traffic gets moving temps quickly come back down to around the mid 90's.

I've never had any issues with heatsoak and what not. BUT I still run the stock airbox and have a great big dirty 100mm cai entering the box from the left inner bumper.

best way to get decent performance in summer is a waterspray intercooler jet. I have had great sucess with this.

I had a cefiro a couple of years ago that was set up for drift and saw a lot of track work in summer and it was also my daily driver.

I had a temp probe lust before the throttle body to measuer intake temps.

When I first got the car in summer with the stock cooler I saw temps of 60deg + then I put the FMIC on and saw an drop of about 10 to 15 deg.

but I was getting pinging on really hot days. so I decided to fit a waterspray system. All it really was was a windscreen washer motor/bottle with a hose going to the front of the cooler that directed 4 water mist nozzles on the front of the cooler. It had a check valve to stop it from siphoning out of the washer bottle. It was triggered by a pressure switch from an old washing machine that was set to 4psi.

As soon as you started to boost it the system would switch on and spray water in a fine mist onto the cooler. It was amazing it dropped intake temps to about 5 to 10 deg above ambient. and stopped the engine from pinging. I am going to do the same mod this summer on my new car and will do a writeup for those interested. All up it cost about $70 for the patrs and a bit of fiddling but its a really good mod. you just have to remember to fill up the bottle every time you fill the car as it only lasts for about a 300k's with spirited driving on a small scource.

Firstly,

How did you get the washing machine into an engine bay? :(

And the way I drive I would need a 20 litre tank of water for my FMIC so, :(

Put the washing machine in the back seats and the 20 litre of water in the front passenger seat.

That way you can wash your clothes and not get thirsty .

:(

Mine said half when I hit 109 on the track the other day.

Its quite scary how quickly it goes from half to the H.

A 3 stage stock temp guage is good, nothing worse than a swaying temp guage. :(

109degree's is ok, over 120-125degree's is where the coolant begins to boil. :S

yes, when you're on boost in the stinkin summer heat.

but how does this help coolant/engine temp?

is it a combo of both that's causing grief in the heat?

Edited by Munkyb0y

Ok ive possibly got the answer for your hard starting issue. I was recently at a work training course for EFI diagnosis. If the day/s before you try to start the car is a real stinker the ECU will record all this data and have the system set accordingly. If then you try to start your car the next morning in a cool condition/engine IE:garage/shade/early morning it is more than likely going to have trouble starting with the new data the ECU has logged from hot daily driving. To see if this theory is correct try pulling out the ECU fuse for a few minutes to reset it.

Hope this helps

Deren

now that's an answer. sounds quite plausible to me.

and that's exactly how it happened. parked it right after a 1hr drive in the stinking heat. started it the next morning in much cooler temps, inside a garage, in the shade.

:)

here's a theory about CAI. it's not my theory, but makes sense to me.

i'm sure it was mad082 (prease confirm) that said this in a thread somewhere.

intake air goes through the turbo where it proceeds to get hot, because the turbo is hot. so cool air or warm air will turn to hot air anyway.

so isnt it better to have an unrestricted pod that can take in as much air as it needs, rather than reducing it's supply of air by boxing it, in the hope of reducing temps by a couple of degrees?

mad082, correct me if i got it wrong.

Apparently for every degree you reduce the intake air temperature you gain 1 Hp. The pod filter shroud is probably more beneficial on a non turbo engine as they dont have/need intercoolers.

Just because the turbine is stinking hot doesnt mean it will directly heat the charge air to the same temperature. The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

The air rushes through there so fast it would barely be heated by the turbine next door. Its the compression of air that causes friction between atoms which in turn causes alot of the increased heat.

Thanks Godzilla, i thought i was going crazy! "turbo heating air due to radiant" :mellow:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...