Jump to content
SAU Community

Recommended Posts

Update : FINALLY found a R34 coupe ;) but will not be ready for a couple or months due to lack of funds :P

I recently finished a batch of "corner" gauge pods for the R33 (See thread SAU THREAD). Check out the thread and my Trader Rating for comments.

I have also finished the design for the S13 Silvia/180SX/Onevia/Sileighty. Now it is time to turn to the R32 & R34 Skylines. I need some interest from R32/R34 drivers people who are willing to purchase these pods. These gauge pods will be similar to the R33 & S13 design (pics available on my webspace HERE)

I only need approx 8 people interested in each pod type to make fabrication of a small batch viable.

Final product will be available through www.JustSR.com which will include undercoat and painting of the pod in matt black.

Group Buy / Interest Expressons will stop when I get 8 people for each pod type, or end of Nov.

-Alan

  • 2 weeks later...

The pod designs for the R32 & R34 have been completed. See pics below. Please reply, email or PM me for interest.

Each pod will accept up to a max of 60mm gauge diameter and 40mm depth.

R32 (Coupe) :

post-1179-1162186334.jpg post-1179-1162186514.jpg

R34 (Sedan) :

post-1179-1162186561.jpg post-1179-1162186595.jpg

-Alan

i'll take a 32 one also

what size gauges does it take? i need a 60mm one

thanks

As stated in my 2nd post above, the pods will fit a gauge up to 60mm. I'll note you and nuffsaid down for one each.

So far, I have 4 people interested in the R32 pod and 2 for the R34 pod. Keep the PM's/posts coming!

I just found out that the 4 door versions are slightly different to the 2 door versions, and the pod I have made for the R32 is for 2 door one and the pod for the R34 is for a 4 door.

So I now want to source a R34 2 door to loan for a weekend to design a pod for that model. If you are in Perth and interested in getting a free gauge pod for you R34 2 door, please contact me ASAP.

  • 2 weeks later...
have u guys designed one for the 34 coupe yet?

id so give u my car but im in melb :cheers:

Not as yet. I have a R34 sedan pod, but unfortunately I'm finding in hard to get an R34 coupe to loan to design a pod for it. I usually borrow cars from Autoworx (here in Perth) but they won't have an R34 coupes for a month or more.

Has ANYONE in Perth got an R34 coupe that I could use for a weekend?? It will be securely stored and will not be driven.

-Alan

PM Wogboy, his in Perth and has an R34 Coupe. I'm pretty sure he'll be interested.

Mistake there. Wogboy is located in Tassie! Anyone else know someone with an R34 coupe in Perth?

  • 4 weeks later...

To date, I still am at a loss that I can't find someone with a R34 coupe in Perth. So instead I've been making gauge pod prototypes for the S14, S15, Stagea to 'pass the time'.

Anyone who offers to lend me their R34 coupe will receive a free gauge pod or $80 cash for their generosity.

  • 2 weeks later...

Single pods for all cars (including R32 coupe) are $79 + postage ($5-$7). The R32 coupe pod and a few other designs are being sent off to the fabricators next week are are expected to be available around end of January.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...