Jump to content
SAU Community

Recommended Posts

erik - your stock bov should be alright - other bov's cause stalling on afm controlled engines since the air isn't being recirculated, and the engine thinks there's more air in there than there actually is ...

whereas the stock bov that you have is recirculating ... though if it's got a leak it'll cause stalling (though unlikely as it's all setup with metal pipes and is pretty hard to take apart with a spanner etc, let alone for it to come apart by itself!

might be a broken afm perhaps - though you'd have other problems such as stalling when you pushing the throttle etc ... if you can make it to a cruise then that'd prolly be a cheaper way to fix it than the mech (though saying that warranty is def in the books so do that)

Link to comment
https://www.sau.com.au/forums/topic/13915-stallinggggggggg/#findComment-277072
Share on other sites

under 2000rpm? the car is made to idle at under 2000pm! no more then 1000rpm so unless ur car is stalling all the time, no offence mate but maybe it's ur driving? :P

adrian :)

p.s if your in gear 2 u would be under 2000 rpm would ya?

adrian :(

Link to comment
https://www.sau.com.au/forums/topic/13915-stallinggggggggg/#findComment-277272
Share on other sites

the problem u present is unbelivably rare. normally, engine will not stall if its above 500-700rpm. correct me if i m wrong. yah, if ur definition of below 2000rpm is below tht range, probably u still know what is going on. if not, think u just wanna find pple to chat, hahha...

no offence.....

i stay somewhere near winthrop, tink i ve seem ur car before, dun tink there be much 34GTT black ard with a indonesian chinese driving it...

Link to comment
https://www.sau.com.au/forums/topic/13915-stallinggggggggg/#findComment-277312
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...