Jump to content
SAU Community

Recommended Posts

I went to a suspension shop recently to get a quote to correct the negative camber that my Tein coil overs had created becuase the ride hide had dropped.

I got a quote for a full 8 x polyurethane busht kit etc made by superpro fitted for $475. Today I go there and they tell me cant fit it becuase the top control arms are aftermarket and use bearings so bush's cant be used and that I will need to replace them with stock ones.....

So my questions is does anyone know if I can use a R32 GTS-T control arms for my GTR. I called nissan todat for the part number and he they were the same part used for both GTR and GTS-T can anyone confirm that or have part numbers cheers.... need help quick.

Cheers

Rob

well you can use aftermarket arms for gts-t and gtr

im fairly sure they are the same.

if you are just gettin them to put bushes in and make them adjustable, it will be fine

Edited by salad

so then I can use R32 GTS-T front top control arms for my R32 GTR correct?

To the ohter guy I already have aftermarket arms. My proplem is they said they are not adjustable...... or could it be he is trying to rip me off or... he said they are ball bearing.... so they must be ok...

yep, they will fit.

it is a little odd that you cant adjust rear aftermarket upper arms. i am assuming you're talking about rear as you dont get heaps of camber from lowering it on the front.

but the guy is right, if they have spherical bearings, you cant replace these with bushes.

perhaps you could post up a photo of the arms?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...