Jump to content
SAU Community

Recommended Posts

My R32 wont kick over. It started playing up a few days ago ever since my alarm screwed up. We had to jump start it etc. Last night it wouldn't start again, so we jump started it again and it started fine. Today it is doing the same thing but my brother insists its not a flat battery. We tried jump starting it again but it just wont kick over. Its not the fuel pump cause we tested that. I'm thinking some sort of ignition problem..? Does anyone have any ideas...? Need to get this sorted ASAP. Don't really want to tow it anywhere.

Link to comment
https://www.sau.com.au/forums/topic/140280-problem-starting-car/
Share on other sites

so your engine is cranking? i know a few things:

if there's not much charge in the battery you can have problems with starting/smooth idling (even though the motor turns over)

if you have problems with your alarm (with immobiliser) then depending on how your immobiliser is setup you wont get power to various places (fuel pump, ecu, ignition, etc...)

i'd be making sure i get ecu power by checking out the led on the unit (on when key is IGN position), making sure the fuel pump is flowing fuel to the fuel rail when the motor is turning over, get the immobiliser situation sussed out by whoever installed it...

So, the starter motor turns the engine, but the engine doesn't want to fire? Have I got it right?

Nissans are VERY sensitive to voltages. A battery may start the car, but then the alternator expends so much of its output re-charging the battery that the ECU thinks there is a problem and the car runs like crap.

The other thing is that the ECU needs a minimum voltage (somewhere around 7V) to be "alive". If the starter motor drains so much voltage that the voltage available to the ECU is less than this critical value, then the engine might spin for ever, but the ECU isn't alive to fire everything off.

If you ever have troubles with starting and batteries, the usual fix is a new battery.

So, the starter motor turns the engine, but the engine doesn't want to fire? Have I got it right?

spot on.

I'm going home tonight to give jumpstarting it another go. It worked last night. I'll go buy another battery asap. It's got to be something to do with the battery. My alarm went off the other night and we had to just let it sound untill it drained the battery (I didn't have the key to turn it off). And since then i've had problems.

Thanks for the advice guys I'll keep u updated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...