Jump to content
SAU Community

Recommended Posts

Just today my Stagea has developed an intermittant miss when at idle.

It only seems to be present under 1000rpm. The wagon also seems to be using noticeably more fuel.

I'm thinking it's a coilpack, but I did drive it a distance with the low fuel light on and it started after that. Maybe it sucked some crap up from the bottom of the tank.

Could it be a partially blocked injector? Would that explain the higher than normal fuel consumption?

Also, wouldn't a stuffed coilpack cause a miss all through the rev range?

Anyone had similar and can help?

Link to comment
https://www.sau.com.au/forums/topic/140430-intermittant-misfire-at-idle/
Share on other sites

I dunno, personally I have had a blocked fuel filter because of gunk and it didnt cause a miss. Never heard of an injector being blocked, but sounds plausable, SK?

If the coil pack was tottally dead then it wouldnt be firing at all, but if it was intermittantly firing then it would get worse as the rpm gets higher, wouldnt it?

But either way I couldnt see any of the above affecting fuel economy that much..............?

ya my car does the same thing.. pretty sure its using more petrol 2 :)

I was told the missing is because my plugs are at 6.x mm or something like that.

She's fine when you drive though, doesnt miss at all..

I had a look at my coilpacks last night, they looked pretty good.. not that i no what im realy looking for though :)

I did have a similar problem with misfiring but my engine stalling and it stuggled to drive at all most times. It ended up being the Air flow meter in my case. It seems to be running well now that I have replaced it. I am about to take it for a drive to Coffs Harbour next week so I should find out if there are any gremlins left.

Gap the plugs to 8mm. Coilpacks are a common problem. They are usually fine down low and start to struggle up high. I dont if the reverse is possible.

Its one of those how long is a piece of string problems. Get it on the dyno!

  • 2 weeks later...
  • 1 month later...

darnit...my wagon started to develop the same missfire at idle...driving seems fine...think its bad but my safc is doing some correction...raised the boost to 10psi and gave it a good revving ....missfire seemed to have dissappeared for now....it started after a normal cruise to canning vale via tonkin n roe....temp outside was quite warm so i dont know if its temp related.

hope its something easy to fix like plugs...or worst case air flow sensor and not a stuffed valve :(

Finally got the whole problem sorted.

After the burnt valves got replaced, it still had a slight (but less dramtic) misfire. The mechanic could not replicate it, so I took him for a drive. The miss also came in under high rpm/load. I nailed the car, and sure enough at about 4500, it started missing and felt like it hit the rev limiter.

They took the coil packs out and got them tested, all 6 were f%^&ed. Replaced them all, car runs sweet as.

On talking to the mechanic, it turns out that my engine was overboosting because of a stuck wastegate. This caused it to be a bit lean (as well as the stuffed injectors) and burnt the valves. This hid the other fault of the coilpacks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...