Jump to content
SAU Community

Recommended Posts

I'll probly like your sr, and props for building one up, but as for talking about it all the time like verbal diarrhea ;)

Coilovers are HSD HR's with 5kg/front 4kg/rear springs, perfect for the street, but still firm cause they're the track spec damper..

Disks are 343mm two piece DBA5000 series, ferodo 2500 pads, custom unique autosports caliper spacer, motul RBF600 fluid, calipers serviced/new seals.. :)

yeah well first stage will be 240kw. then push standard bottom end to 270 and then ill hit 300ish

what are the ferodo pads like?

yeah coolo. that rotor will crack as soon as it gets red ;)

if he gets them hot enough

Not hard with some spirited driving :)

Nah she's all good, it takes a massive amount of braking to make a disk red hot and enough to crack, i'll also be fitting ducks from the lower front bar inlet on both sides and will be pointing them at the back of rotor.. so the chances of me cracking a rotor? slim to none..

Nah she's all good, it takes a massive amount of braking to make a disk red hot and enough to crack, i'll also be fitting ducks from the lower front bar inlet on both sides and will be pointing them at the back of rotor.. so the chances of me cracking a rotor? slim to none..

id try to get the duct to come into a point where the air flow will cool the entire rotor, not just the back. caus if u go cooling the back and not the front, well it's just gonna crack, and crack in a big way!

Tell that line to your engine builder.."i knew my engine was running rich just before i saw a piston inbed itself in the bonnet !!".

I dont believe that for a second.You might be able to get a idea but throu listening but you dont know exactly what your air/fuel ratios are...

Ah in most cases you cant unless you have a meter or gauge. you might be able to hear an audilble knock or ping bit the damage is usually already done.i wouldnt rely my hearing on a modded import with a bit of boost and timing.

Get a stoich guage there only a 160 dollars approx.. maybe cheaper these days.

rofl :/ +1

hey dynamix i saw u out last night mate. i was the guy in front, next, and behind u in a silver r33 with the brake light that lit up the rear garnish. u may have also seen have my blue parker lights, and smelt my exhaust with no cat.

this was happening when that silver s15 was stalking us!. he films everything, with a camera hangin out the window=wierd.

mate.... love the wheels=dish. lol, i was gonna cut u off and yell out "yo dynamix" but, would be gay.

SWEET RIDE!!!!!

Edited by r33cruiser

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...