Jump to content
SAU Community

7 To 11 Test'n'tune Nov 2nd @ Willowbank


Recommended Posts

Just wondering if anyone from SAU is going to the 7 to 11 test and tune tomorrow night?

I did have a few mates who were going but it appears they are now wearing skirts and don't want to go... Need to organise a bunch of people to cruise out with :(

Also wanting to know if there will be anyone who has a support crew who wouldn't mind looking after my spare tyre, tools etc when I'm racing :yes:

Cheers.

Just wondering if anyone from SAU is going to the 7 to 11 test and tune tomorrow night?

I did have a few mates who were going but it appears they are now wearing skirts and don't want to go... Need to organise a bunch of people to cruise out with :rofl:

Also wanting to know if there will be anyone who has a support crew who wouldn't mind looking after my spare tyre, tools etc when I'm racing :rofl:

Cheers.

hi mate, pm sent, im interested in going, finally some nights off this week, havnt ran my car yet. ..

just find a security guard who would be happy to sit on the tyre and fall asleep on it for you.

Tried that one last time... Asked if I could leave my jerry can near the scrutineering desk and they basically said it may not be there when I got back... Luckily for me it was and I had enough fuel to get home :rofl:

12 flat ???

Nah... seriously mid to high 13s would be good.

I've run a 14.1 @ 100 mph on a 2.3 second 60 foot... so if I can get my 60 foot times down, high 13s should be realistic.

... Mods are EBC, power FC, pod filter, high-flow cat, and catback exhaust... Everything else is stock (standard SMIC and standard turbo).

hey i dont know if this will help but last time i went out i took my stockos and changed from my 18s while i was there. i just left my 18's with the jack under a sheet i put in my car so not to dirty the seats and left them on the grass around other parked cars and people. I was worried first and kept checking up on them but i quickly relised they were fine. Although now ive posted this on the net it might be a different story, nobody get any ideas.... lol

Hey mate, I will definitley be out at Willowbank tomorrow night. But unfortunatley I am also without pit crew :)

I wish to go to, but now i have an issue with needing a helmet :). on such short notice i dont have a helmet to use..

I wish to go to, but now i have an issue with needing a helmet :). on such short notice i dont have a helmet to use..

You can buy the helmets pretty cheap. I have seen them at the motorcycle shop on the corner of Moss St. and the M1 service road starting at about $70 from memory. :)

You can buy the helmets pretty cheap. I have seen them at the motorcycle shop on the corner of Moss St. and the M1 service road starting at about $70 from memory. :ninja:

ahh nice, cheers ill check em out next week. well if i cannot borrow one, looks like i wont be joining yaz tomorrow night.

gettin me green stuffs and other bits this week bit more important than a helmet.

have fun.

ahh nice, cheers ill check em out next week. well if i cannot borrow one, looks like i wont be joining yaz tomorrow night.

gettin me green stuffs and other bits this week bit more important than a helmet.

have fun.

looks like i got a helmet. :) now just need to know where im going.. can someone pm me addy and some directions, i got ubd. so i should be ok?..

ps.. anyone got any room for my spares?

Edited by silverbulletR33
looks like i got a helmet. :happy: now just need to know where im going.. can someone pm me addy and some directions, i got ubd. so i should be ok?..

ps.. anyone got any room for my spares?

gees do you want me to drive your car down the strip for you too? lol jokes dw we've all had these issues before.

gees do you want me to drive your car down the strip for you too? lol jokes dw we've all had these issues before.

lol , ended up using my 18"s for the job, just dropped the pressure to 26 psi. only went to 26 cause i still had to drive a fair while from the track on em.

Great meeting ya Chris. was a good night. my first time, ran a 13.93, not too bad i guess. just gotta work on my starts.

ps. shouldnt have jinx myself ;)

Good to meet you too Dale... Was a very good night (except for the oildowns!)

I ended up running 13.96 @ 100mph so I got the time I was after.

Were some impressive times last night:

'Easy St' R32 GTR ET: 10.9 seconds

Marty (STZ automotive) SR20 powered celica ET: 11.6 seconds

Alex (GT Auto garage) R33 GTR ET: 12.0 @ 127 mph! (was definately bogging down off the line and falling off boost + struggling for traction on boost) - looking forward to seeing some low 10 second passes soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...