Jump to content
SAU Community

Recommended Posts

hey guys, i have a R34 GTT and im runnin 255/40/17 on the rear, they are down to legal limit of grip left..

either way, what PSI should i use to get most grip on the touge in the dry until i can replace the tyres.

its just 1 final run i need to make.

also if its damp, suggestions?

Link to comment
https://www.sau.com.au/forums/topic/141693-best-grip-cant-afford-new-tyresyet/
Share on other sites

Won't matter a bugger if it's dry.Tread only reduces grip in dry weather.That's why racers run slicks at every opportunity.If it's damp you'll get tail happy.If it pisses down wait until it stops.Keep fingers crossed,take bible,watch out for black cats.

Come to think of it can't you get some secondhand ones with decent tread to tide you over? Much safer for cops and wet weather.

Edited by wun hung lo

It still does matter if the road is dry.

Yes, tread depth only matters for the rain, but when tyres are that worn, they are old and hard and ahve no traction at all.

Illusive, I wouldn't be touging anythign with shit tyres. Just drive it like a grandma until you can afford new tyres.

It doesn't matter whether you run 20 psi, 30 psi or 40 psi. they'll be shit anyways.

Lower pressures will increase your contact patch, but decrease the tyre's resistance to sidewall flex. So you're talking trade-offs.

What kind of tyres are they? If they are a sports tyre with reinforced sidewalls in the construction, you can afford to run lower pressures.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...