Jump to content
SAU Community

Recommended Posts

  • 7 years later...

Hey guys i have a Skyline R34 gtr v spec nur II and i would like to make the front and rear rotor upgrade but i dont know what do i have to consider tu make this upgrade can you guys help me with information that i need to know before making this upgrade.

Im looking for drilled and slotted rotors front and rear .

any information would be helpfull

That is the N1 rear rotor with 322x22

The Standard Brembo R32/33/34 is 300x22

R32 V-Spec, R33

F 324x30 114.3×5 CRDNF2003-006 - SCRN006 GPRN006 **

R 300x22 114.3×5 CRDNR2006-008 - SCRN008

R34

F 324x30 114.3×5 CRDNF2003-006 - SCRN006 GPRN006 **

R 300x22 114.3×5 CRDNR2006-008 - SCRN008

R34 N1

F 324x30 114.3×5 CRDNF2003-006 - SCRN006 GPRN006 **

R 322x22 114.3×5 CRDNR2022-012 - SCRN012 GPRN012

Edited by ichi-go

Same calipers, different mounting brackets

The 322mm rear disc models (N1, VS2) used a different rear caliper to the 300mm models.

I know because I have done the conversion.

Just bolt them in.

I used the DBA 4000 slotted Z33 350Z brembo rear discs on mine as they are the same diameter and thickness. They are only 0.5mm different in offset which is no concern.

If anyone needs exact rotor diameters, thickness and hat heights etc, PM me, im a RDA agent and happy to share specs to help out members here.

About the stay away from chinese rotor comment, where do you thing RDA, DBA and Brembo cast their mass production rotors? :)

Edited by GTRPSI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...