Jump to content
SAU Community

Recommended Posts

hi guys

i won a r31 skyline s3 with a few mods.

what im now after is getting in to raceing as my boss and parents are (forceing me ) to do it as ive done some pretty stupid shit on the roads i.e drifting, 200km/h runs.

what i need help on is the following.

what licence i should get.

im looking at doing club spec events, i.e circute and drift.

minermen requirements to get on the track.

all ready have a asr aproved helmet.

i know i will need a fire exstigusher, bonet pins, most likly a roll cage.

r-compund tyers.

any other info or guids to people who i should speek to would be grateful

i live in melb if that helps.

and finerly when will the next trak day be for the club so i can come and watch.

Link to comment
https://www.sau.com.au/forums/topic/141884-getting-set-up-for-tack-days/
Share on other sites

First thing you need to do is make sure that you have your head on straight, and realise that the racetrack can be dangerous if you do not know what you are doing.

I would do a performance driver training course before you go on track, and learn how the car feels, reacts and recovers from getting out of shape, then when you do your first event, go to Winton as it is the most friendly, wall wise, track in Victoria. Enter as a trainee, and ask for someone to sit in the car during the sessions to help make sure that you are not over driving or doing any thing silly. (You also will not be timed as a trainee, so there is no pressure to go faster than anyone else)

If you are only doing club level sprints, you need a CAMS L2S license, you can download the forms from the CAMS website at www.cams.com.au

To get on track you need an extinguisher, Helmet, clothing that is fire resistent (ie jeans, cotton shirts) and covers from neck to wrists and ankles, a secondary bonnet restraint.

Preping the car I would give it a full service with new, high quality fluids, put the best brake fluid that you can afford in the car, as well as good brake pads. A roll cage can be a good suggestion, but be aware that they can cause (along with bonnet pins) issues with road legalities. I wouldn't bother with R-spec tyres or major suspension changes at first, I would go out, learn the car on the stock suspension (as long as it isn't worn out) and good road tyres, and then go and speak to a suspension expert to get the most out of the car.

a race track can be dangerous true, butme believe not as dangerious as the street.

thanks for the info blackrex. i just need to get a few things so i can start. i see there is a track day next at winton in april.

the cars in pretty good shape as im aapprentice mechanic.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
×
×
  • Create New...