Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Hey,

I was just wondering...

Would an NA R32 RB20DE beat a commodore or falcon v6 off the lights?

My skyline has no mods ATM, and all my m8s commos and falcons don;t either

I wouldn't think so.

All though peak power might make the power to weight look ok its the average power accelerating to that peak power that is lacking. The 2ltr really is too small for the 1320kg R32.

A good example of this is pull up next to a VL 5speed RB30E. ~116fwkw or there abouts. Mine made 80rwkw bone stock back in the day but it used to whoop 3.8ltr manual commo's. Well not whoop but just edge them out in the top end. :P

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2649730
Share on other sites

when i had an auto n/a 3 litre, i had no chance againts auto vs commys, used to race my mates commys all the time, could never get em off the line.. u would expect the n/a r34s to beat commys n falcons wouldnt u ?? rb25de

Edited by GTR Power
Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2650301
Share on other sites

Yep the Vl auto box's are like rubber bands. :P

+ the 3ltr doesn't have that much down low so the only option is a manual where you can bring the rev's up and play fair. :(

I found the manual VN-VS's to feel a little sluggish off the line actually. Its as if the auto actually help them lunge off the line.

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2650381
Share on other sites

it really depends on the driver of each car, and what model commodore. the later model, like vx and vy are heavier than the vr/vs. they have a touch more power though.

the skyline may have the same power, and be a touch lighter, but it is well down on torque. this means that you have to rev harder to get the power, where as a big aussie 6 will pull from lower in the rev range.

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2650596
Share on other sites

Hey,

I was just wondering...

Would an NA R32 RB20DE beat a commodore or falcon v6 off the lights?

My skyline has no mods ATM, and all my m8s commos and falcons don;t either

Teh Falcon V6 can nevah lose!!!!!!

...because they don't exist.

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2651521
Share on other sites

I've driven VX/VZ commdores and they weren't too great. A R34 non turbo would beat them no problemo if you let them rev up.

Current model falcons on the other hand are hell fast, I've floored an auto BA series 2 falcon and it gave atleast as much g-force as a stock auto R34 GT-T no shit! The non-turbo R34s would definately be beaten by a BA falcon.

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2652242
Share on other sites

I didn't really ever want to get involved with this "this is faster than that" type thing... But my friend, who regularly rips me off decided to say my car (R32 4 Door, RB25DE) was a crappy Japanese peice of gay F***en s***. He really doesn't like imports or something, anyway he brought up this discussion which replied with nothing. I hate arguing.

Thing is, he rides dirt bikes... and just about every bike he has ridden/rides is Japanese. I don't see his point :S Typical Commodore lover, when he rips off Fords he looks at me because he knows I don't "support" Holdens... thing is I don't really "support" Fords either. I used to "prefer" them, haha in yr 6 but since I've been into imports I'm not much into Aussie Cars.

He said that his/my friend's mums VN Commo Auto Wagon, would beat my Skyline easily, now it may well be the truth I don't know, however he then went on to say that I would be there "changing gears" and from what I've read, Manuals are usually a quicker change, except from an auto racing box or something who cares. Then he said his Dad's VP Auto could beat my friends mums commodore... so in other words he said his dads car was really fast and my car was a piece of shit.

My car was weighed today: 1340kg. It's a Manual RB25DE R32 with pod and exhaust (soon :( hehe) vs a VN Commo Auto Wagon... 1500kg?

Anyway I'm just sick of him ripping of mine/my family's cars too... he continuenly says my Dad's E46 328Ci is a piece of crap etc etc. I think people should get over the "this would beat that" thing.

-Jimmy.

Edited by -Jimmy-
Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-2652948
Share on other sites

  • 9 months later...

The best way to find out is to have a race?

but think about it this way,

its a 2.0ltr vs a 3.8

the commodore rightfully should win as it is a much bigger and more pwerful enigne, regardless of the few extra kilo's the commonwhore is dragging around.

the falcodores autos dont help them as stock they are shit family cars but a manual version would win easily.

my N/A Rb25de beats them easy but the newer models are a bit faster.

the Rb20de doesnt have enough power, so basically get a turbo.

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-3283250
Share on other sites

The best way to find out is to have a race?

but think about it this way,

its a 2.0ltr vs a 3.8

the commodore rightfully should win as it is a much bigger and more pwerful enigne, regardless of the few extra kilo's the commonwhore is dragging around.

the falcodores autos dont help them as stock they are shit family cars but a manual version would win easily.

my N/A Rb25de beats them easy but the newer models are a bit faster.

the Rb20de doesnt have enough power, so basically get a turbo.

Rubbish, you'll be surprised what an RB20DE will do with some light mods. Don't just write them off. :nyaanyaa:

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-3283619
Share on other sites

there are too many variables. it depends on model commodore/falcon as a vn/vp is much lighter than a vt/vx (infact they are about the same weight as a r32), but then the vx will put out about 30-40hp more on a dyno.

if it was standard manual ea falcon (s-pac) vs manual vp commodore, vs manual rb20de, i would say the order would be probably falcon, commodore, skyline. i used to own a manual s-pac ea falcon and they don't actually go that bad. i did it with those models as they are all about the same age.

if you were to change that scenario to late model cars, and add in a magna then the order would change slightly. the order would be something like: magna, falcon, skyline, commodore

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-3284023
Share on other sites

Okay.

My Supra held dead level, with a R34 GTT (Auto in both)

Later on, I got my rear end handed to me by a V8 VN with an exhaust.

Basically, the R32 would most likley be beaten down like my Supra against a V8 in the VN.

Now against the V6, on the roll, I just start to loose out.

So I'd be hazarding a guess, that the R32 would loose out too (BTW, my Supra IS twin turbo)

Link to comment
https://www.sau.com.au/forums/topic/142303-vrs-falcodore/#findComment-3284240
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...