Jump to content
SAU Community

Recommended Posts

Guys

My engine is completely stock (stock boost)

only mod is a sports exhaust

i have a bit of a prob when im boosting

my car will boost nicely to mid way boost

when i hit 5rpm and im going into high boost the car wont boost any more

it sorta jolts and then accerlerated all the way to max revs, but obviously

not as it should

i though maybe it could be running rich cause of the exhaust

or turbo is blown,

or coilpacks are screwed

or airleek

any ideas anyone??

Link to comment
https://www.sau.com.au/forums/topic/142377-not-boosting-past-4-psi/
Share on other sites

isnt stock boost 10psi and shouldnt it reach it way before 5k rpm. The better exhaust system you put in normally increases boost abit as it frees up the hotside from some backpressure.

Wait, is this a rb20 or 25?

Yeah on a RB20 the stock boost is 10psi. It should hit 10psi at around 3500revs. The exhaust should also make it boost up quicker. Could be a leak in one of your lines or it could be your Acuator. My mates R32 was only boosting to 7psi, he put on a boost controller and it made 10psi no problem. :D

Edited by r32matt

Ahh ok,

Well with the Rb25 you will get 5psi boost at first and then at 4500revs it will go up to 7psi. It has a dual stage boost solenoid. So it could be that which is broken or not working properly. Check the lines going from the turbo to the solenoid and see if there are any leaks. By passing the solenoid and just using a boost controller also might fix the problem, plus you will get a set boost of your choice. So you could run 7psi or 10psi straight away. Better than running 5psi and then 7psi.

:D

Edited by r32matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...