Jump to content
SAU Community

Recommended Posts

I just thought I'd give a quick heads up and update some of the stuff from my previous posts. We took the car back to the dyno after fighting what we believed to be a misfire problem. We hardwired the coils, hooked up an HKS Twin Power DLI, and rechecked the plug gap, but still had no luck. Then I figured out that the AEM boost cut was set too low! So all that for nothing, lol. Anyway, we also hardwired the fuel pump because we had a voltage loss going to the pump, so that fixed that problem. With the car getting proper fuel, and no boost cut (or imaginary misfire), we layed down 500rwhp/372rwkw and 420rwtq/313rwtq @23psi.

We're still running a bone stock head, just ARP's, and headgasket for the increased boost. I'm not sure what the limit of the stock cams are on a non-nitrous motor, but we'll soon find out. The 550cc injectors are officially maxxed out, so it's time for some 750's, and then we'll crank the boost up to 28psi to see what it makes.

We took it to the track and it ran 11.01 @128mph, so it was a pretty solid setup. This is also in full street trim, including a body kit, and a stereo system with XM sattelite radio! The car will be on the cover of S3 magazine in March, so check it out if you get a chance. Thanks to everyone on here who gave help and suggestions. It really did make life easier 8-) We're not done yet though. We've got more to come...

Edited by SleepingTalon
Link to comment
https://www.sau.com.au/forums/topic/142563-newer-gt35r-dyno-results/
Share on other sites

I just thought I'd give a quick heads up and update some of the stuff from my previous posts. We took the car back to the dyno after fighting what we believed to be a misfire problem. We hardwired the coils, hooked up an HKS Twin Power DLI, and rechecked the plug gap, but still had no luck. Then I figured out that the AEM boost cut was set too low! So all that for nothing, lol. Anyway, we also hardwired the fuel pump because we had a voltage loss going to the pump, so that fixed that problem. With the car getting proper fuel, and no boost cut (or imaginary misfire), we layed down 500rwhp/372rwkw and 420rwtq/313rwtq @23psi.

We're still running a bone stock head, just ARP's, and headstuds for the increased boost. I'm not sure what the limit of the stock cams is on a non-nitrous motor, but we'll soon find out. The 550cc injectors are officially maxxed out, so it's time for some 750's, and then we'll crank the boost up to 28psi to see what it makes.

We took it to the track and it ran 11.01 @128mph, so it was a pretty solid setup. This is also in full street trim, including a body kit, and a stereo system with XM sattelite radio! The car will be on the cover of S3 magazine in March, so check it out if you get a chance. Thanks to everyone on here who gave help and suggestions. It really did make life easier 8-) We're not done yet though. We've got more to come...

Congrats mate

theres not much more without nitrous that i could get out of them

i made 502 rwhp and then 591 with gas on standard cams

what sort of motor, and in what car (auto/Manual)??

The car is a 5spd. The bottom end is a Wiseco/Eagle Combo, and it's in a 1998 240sx. The motor is great, I can't say enough good things about it. If I put more injector, and throw more boost at it, it should be at around 550whp. The cams are definitely running outta breath for just having boost, but that problem will be addressed shortly as well. I've got an old video of it making 450whp, and drifting, which is from the previous tune (back when we were having "spark" issues), and another video of it at the dragstrip with the NEW tune. Lemme know what you think. Thanks again guys. This forum has been a TON of help!

OLD TUNE, 450WHP DRIFT

http://www.youtube.com/watch?v=Vjh4JN-ihM8

NEW TUNE, 500WHP DRAGSTRIP

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...