Jump to content
SAU Community

Recommended Posts

Hey all

I've had a look round SAU and i cant really find anything to answer my question.

What is the law for nitrous fitted to a street registered vehicle in WA...i believe its illegal but i've heard people saying you can have it installed but the lines disconnected from the bottle. Is this true?

I've seen heaps of cars at shows with NOS which are people daily drivers and wondering what they do to get around cops.

Does anyone know of who i can contact to find 100% correct information?

Cheers for and info people can give me

Link to comment
https://www.sau.com.au/forums/topic/142696-nitrous-laws-in-wa/
Share on other sites

Try Hyperdrive or Top Racing - the guys there will know what's street legal.

A while ago my nutty mechanic mate had just about convinced me to chuck a 50HP shot of nos in my 33 but my other mechanically minded friend just looked at me and said "SASHA NO it's illegal and it puts a lot of pressure on your engine." Lol so I didn't really take the idea much further

Yep contact the actual govmt agency for confirmation as everyone seems to have different interpretations of the rules and regs. I'd find out what the ADRs say about it and then contact the road authority in WA to see what their view on it is.

To my knowledge it is illegal to have ANY part of a nitrous system installed in a car on the road whether the bottle is connected or not.

Nitrous kit fitted to car is illegal to drive on public roads in WA.

Installations I have had a part in have all been 'invisable'. I don't believe in driving around with the stuff on the road. It's something like planting the foot real hard and breaking the speed limit that you should do at the track.

I fitted my kit on my old R33 gtst and everything was hidden real well. The kit was sold to 2rismo who now runs mid 11's with it and the stock turbo.

I'm preety sure its illegal $10,000 fine I think same as removing airbag steering wheel...as dan mentioned, you can have the set up in the engine bay but cannot be connected to a nos bottle....can try blowing air as you drive..

puff puff~~

subwoofer box has been done before, to conceal the bottle. It needs to be vented. The problem is that driving around with nitrous connected is that in the event of an accident, not even your fault, you may face charges and the insurance company will not cover the cars repair. Not to mention that nitrous oxide is an accelerant when it comes to any kind of fire you may have and the bottle can explode if heated too much by the event of a fire etc.

My 2c is get a kit if you like but, forget running around on the street with it. Save that fun for the drags.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...