Jump to content
SAU Community

Recommended Posts

What batteries do you guys use?

I have a cheap ass power breed 305CCA battery and its the only one that will fit onto the tray and onto the small + - terminals.

If I turn my headlights on everything else (dash lights, cd player, SAFC) goes very dim. My alternator is charging correctly but I also have a grounding kit.

Had a flat battery today from a 10 month old battery and it was completely dead!!! is it normal for skyline batteries to last this long?

Thanks guys :yes:

Link to comment
https://www.sau.com.au/forums/topic/143146-attention-32-gtst-owners/
Share on other sites

If lights are going very dim then your alt isn't up to the task and should be replaced.

With everything on place a multimeter over your battery terminals and check the volts. It should be no lower than 13.2v preferably it should hold 13.8v.

An alternator check wouldn't go astray, it will save you the possibility of draining a new battery when you throw it in. I replaced my battery a few weeks back, I think your looking for a R57 battery (I think that is the code). It will fit in stock location, you should be able to find one around the 450CCA rating.

Fixxxer :D

I run an Exide Evolution 480cc

http://www.exide.com.au/products/index.php

The first battery I had was a dud from the beginning, it used to go flat within 30minutes of leaving the radio on. Overnight even if not started for a few days it was fine.

I replaced earths etc and it still played up.

On the autoshops battery tester it came up as ok BUT i saw the cc reading and it was down to 400cc.

1year later it began bubbling and leaking. I had it replaced, the bloke at exide said the battery must of been dropped or overcharged.

Both of which had never happened in my hands, the pfc was reading a perfect 14.2v when cold and 13.8v when warm. Never once was the alt overcharging.

Dropped the new battery in and its been perfect since. Almost been another year.

I think mine was just a dud from factory.

i run some big-ass century thing.... barely fits in the tray, and is 500ish CCA i think... had to replace the battery terminals to bigger ones too.... will get the model # when i get home...

i want to find a small battery (physically) with half-decent CCA (enough for the car... does anyone know the factory spec?) that is lightweight... hopefully i can shed about 10kg on the r/h front of the car by going to a smaller battery!

The 480cc exide has the positive on the right and negative on the left. So the opposite from factor I believe.

It will also require a trip down to clarks rubber for a small piece of rubber mat to go under the battery. You need the rubber to lift the battery up a touch as its height is slightly too small.

i run some big-ass century thing.... barely fits in the tray, and is 500ish CCA i think... had to replace the battery terminals to bigger ones too.... will get the model # when i get home...

i want to find a small battery (physically) with half-decent CCA (enough for the car... does anyone know the factory spec?) that is lightweight... hopefully i can shed about 10kg on the r/h front of the car by going to a smaller battery!

You're going to have to compromise, if its weight you want to save, then you're not going to have a high CCA battery. The weight savings will only be fairly small, I think 10kg saving is pushing it.

I don't know about conventional batteries, but out of Odyssey and Optima batteries, you are best off with getting hold of an Optima Yellow Top D51, which should weigh around 26pounds, or 12kg. It still has good CCA and RC, but they don't come cheap. I have a Optima red top in my other car, and they are a sweet battery, but weight wasn't an issue for me.

Fixxxer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks man, I appreciate that. I'll keep it in mind going forward, important to know.
    • I strongly recommend anyone playing with cars chasing anything electric, get a basic understanding of using a DMM, and about 12V DC systems. They're REALLY easy, you only need to know V=IR and how to apply it, and you can work out what your readings should be doing. For a simple check on a light bulb, you're looking for 12V at the positive to the light, a near zero resistance to ground, and then for a small resistance across the globe when unplugged. If one of those values isn't right, you won't get what you need. Now if they're all okay,and you then plug the light in, and it still won't work, you now do a voltage check across the globe positive to negative. It should effectively read full battery voltage. If it's not, especially if it's quite low, the age old V=IR starts to be able to be thought about, you now know though, for the current flowing, there isn't much voltage for the given resistance, but the rest of that V has to be dropping somewhere else. So now do a voltage check from ground of globe, to ground of car, then do voltage check from positive of battery, to positive of the light connector. Things like a high resistance in a wire/join will start to "steal" voltage on you. So now step back through which ever wire, until you find the voltage drop is non existent, you're now before what ever is steal your voltage for example.   There's plenty of YouTube videos, but really worth understanding some V=IR, and doing some even theoretical numbers to start to understand it. Then you'll know what the DMM is telling you.
    • Is Jackie home by Friday?
    • Item 10: Tech Edge wideband sensor interface and display. You’ll need to buy a new sensor. $150. Item 11: part of a Willians 5 point harness. $40 Item 12: OS88 gear display. No need for it now, my PPG sequential came with one. $30
×
×
  • Create New...