Jump to content
SAU Community

Recommended Posts

What batteries do you guys use?

I have a cheap ass power breed 305CCA battery and its the only one that will fit onto the tray and onto the small + - terminals.

If I turn my headlights on everything else (dash lights, cd player, SAFC) goes very dim. My alternator is charging correctly but I also have a grounding kit.

Had a flat battery today from a 10 month old battery and it was completely dead!!! is it normal for skyline batteries to last this long?

Thanks guys :yes:

Link to comment
https://www.sau.com.au/forums/topic/143146-attention-32-gtst-owners/
Share on other sites

If lights are going very dim then your alt isn't up to the task and should be replaced.

With everything on place a multimeter over your battery terminals and check the volts. It should be no lower than 13.2v preferably it should hold 13.8v.

An alternator check wouldn't go astray, it will save you the possibility of draining a new battery when you throw it in. I replaced my battery a few weeks back, I think your looking for a R57 battery (I think that is the code). It will fit in stock location, you should be able to find one around the 450CCA rating.

Fixxxer :D

I run an Exide Evolution 480cc

http://www.exide.com.au/products/index.php

The first battery I had was a dud from the beginning, it used to go flat within 30minutes of leaving the radio on. Overnight even if not started for a few days it was fine.

I replaced earths etc and it still played up.

On the autoshops battery tester it came up as ok BUT i saw the cc reading and it was down to 400cc.

1year later it began bubbling and leaking. I had it replaced, the bloke at exide said the battery must of been dropped or overcharged.

Both of which had never happened in my hands, the pfc was reading a perfect 14.2v when cold and 13.8v when warm. Never once was the alt overcharging.

Dropped the new battery in and its been perfect since. Almost been another year.

I think mine was just a dud from factory.

i run some big-ass century thing.... barely fits in the tray, and is 500ish CCA i think... had to replace the battery terminals to bigger ones too.... will get the model # when i get home...

i want to find a small battery (physically) with half-decent CCA (enough for the car... does anyone know the factory spec?) that is lightweight... hopefully i can shed about 10kg on the r/h front of the car by going to a smaller battery!

The 480cc exide has the positive on the right and negative on the left. So the opposite from factor I believe.

It will also require a trip down to clarks rubber for a small piece of rubber mat to go under the battery. You need the rubber to lift the battery up a touch as its height is slightly too small.

i run some big-ass century thing.... barely fits in the tray, and is 500ish CCA i think... had to replace the battery terminals to bigger ones too.... will get the model # when i get home...

i want to find a small battery (physically) with half-decent CCA (enough for the car... does anyone know the factory spec?) that is lightweight... hopefully i can shed about 10kg on the r/h front of the car by going to a smaller battery!

You're going to have to compromise, if its weight you want to save, then you're not going to have a high CCA battery. The weight savings will only be fairly small, I think 10kg saving is pushing it.

I don't know about conventional batteries, but out of Odyssey and Optima batteries, you are best off with getting hold of an Optima Yellow Top D51, which should weigh around 26pounds, or 12kg. It still has good CCA and RC, but they don't come cheap. I have a Optima red top in my other car, and they are a sweet battery, but weight wasn't an issue for me.

Fixxxer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...