Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm helping a mate at the moment install a kit that he got from just jap (The cooling pro type 1 kit). At the moment it seems that none of the mounts to fit the cooler into the car actually fit, and the piping looks nothing like the picture that appears on the just jap website? perhaps they've used one generic picture i'm unsure

From the installations i've been involved with in the past, which were both r33's had mounts that lined up pretty much perfectly with the bottom chassis of the car where the engine splash guard bolts in, however the r34's holes are obviously in a different place, but the bottom mounts look very much like the ones that came with my r33 kit and arn't nearly long enough..

Just wondering what other peoples experiences has been with these kits.. cheers

Link to comment
https://www.sau.com.au/forums/topic/143451-just-jap-r34-cooler-kits/
Share on other sites

Have you spoken to JustJap?

Maybe you were sent the wrong gear?

My thoughts exactly! - and if the kit wasnt test fitted before he installed it he wouldnt have noticed.

Hey guys,

I'm helping a mate at the moment install a kit that he got from just jap (The cooling pro type 1 kit). At the moment it seems that none of the mounts to fit the cooler into the car actually fit, and the piping looks nothing like the picture that appears on the just jap website? perhaps they've used one generic picture i'm unsure

From the installations i've been involved with in the past, which were both r33's had mounts that lined up pretty much perfectly with the bottom chassis of the car where the engine splash guard bolts in, however the r34's holes are obviously in a different place, but the bottom mounts look very much like the ones that came with my r33 kit and arn't nearly long enough..

Just wondering what other peoples experiences has been with these kits.. cheers

How about you ring them and speak with Darron first, before you post a thread criticising their product?

I have the Cooling-Pro kit on my R32 and the fit is perfect, I was also in the shop when they took the photos on their website, so no, they are not generic.

Aphid - Glad I found this thread.

This is highly unusual and certainly completely different from the rest of the feedback we have been receiving.

We have found a few cases where kits dont appear to lineup due to a test/dummy fit not being done prior to cutting hoses and lining up piping. Things like this can throw the rest of the kit alignment out.

Aside from that, if there is ANY problem at all with your kit, for whatever reason, we will resolve the issue, or replace it immediately, with no question. We guarantee the quality and fit of our kits (of course assuming correct installation) and all are backed by a 12 month warranty.

Please have your friend give Darron a ring in the morning on (02) 9545 0532 and if there is a problem, he will fix it straight away.

Regards,

Steve

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...