Jump to content
SAU Community

Recommended Posts

hey im after a cheap set of 2nd hand front coil overs for a r32, dont care if there old just in working order, need to lift the front of my car up the front tyres r in the guards and the backs are bout 1/2inch off the guards so its a drag spec look haha

cheers - adrian

i urgently need new rb20det injector. None of nissan stores have them in stock and it would take about 3 weeks to get it but i need it by next week. None of second hand ones i tried work and i dont want to buy another one just to find out it doesnt work. and as for aftermarket... i dont have $1k... this might belong into wtb thread, but i think its unlikely any of you guys have one... but if u do that would be great

Edited by Rocky88

yea... nissan ones are just crazy expensive... i might go with working second hand ones, but i just found out it might not be injectors that are responsible for misfires...

sorry for making this a topic btw, just really short on time. mods, feel free to merge with wtb topic. :cheers:

i have x6 stock rb20det injectors that were all working perfectly when i pulled them out!

do you also have igniter module? thanks btw

Edited by Rocky88

Hi

I am looking for a good condition set of stanbard struts for a R32-GTR, Something that will be comfortable to drive around town on and have not been cut down or butchered, Could get away with a rear set only If I had to.

Also looking for a drivers side door trim, My armwrest is worn right through to the metal.

Cheers Trev

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...