Jump to content
SAU Community

Recommended Posts

you're a fool

you're a fool also

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

that would mean that he would be over boosting something fierce and wouldnt have a turbo left or a motor.

its not over boosting.

well the gate wouldnt be stuck then. if the gate is stuck and not open the excess boost wouldnt be realeased and therefore create the over boost. obviously the gate it opening and operating as per usual. could he have a straight through exhaust as i cant hear my screamer over my zorst and the screamer dumps are not very loud. need external gate for that shit. or he has made a split dump and plumbed it back in so it like normal but better flowing

the screamer one. if it aint over boosting or its not makeing noise i dont understand.

it has to do either or ur turbo is f*kd and not spooling

the custom plumb back one wont scream as its plumbed back in.

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

And if the dump was faulty Andrew would honour his product 100%

Think your mate borked the install

think your wrong. he is a mechanic.

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

its internal gate.

ok sir.

Mitch, I have no idea wtf you are on about here :turned:

if its jammed the wastegate shut then it would be free boosting and popping your turbo, or better yet your mates bottom end? What your saying makes no sense......... must be a shit car lol

mechanics dont always know what they are doing.

i had to go fix a certain auto 33 as a certain large mechanial workshop with like 20 stores around adeliade never mind aust wide cause it kept cutting out.

simple determination was his t piece was crap and winding out spiking his boost and the ecu was shutting it down.

even tho the ecu that was being run was a power fc which was tuned in mt barker by reputable large mechanical workshop.

you only know what you deal with mechanic or not

and mitch out of all of this i am not bagging you but seriously i am so confused.

if not tell him to come past mine. i can find it easy as hell.

Edited by sneaky1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...