Jump to content
SAU Community

Recommended Posts

Hey Guys,

I'm Cas, and im new to SAU, my first Skyline (Black R33 S2) is on its way over from Queensland now... and i won't be able to wait much longer!! :P

I'm gonna have to take it through Regency, i know what mods it currently has on it... could anyone, tell me what i will get through with and what i would have to change/rip out? Thanks.

It is a 40th Anniversary, which has:

- Tein 16 level adjustable coilovers.

- Hks silent, hi-power exhaust system.

- Hid 8000k headlight system.

- Blitz turbo timer.

- Trust Airinz air filter.

- Cusco strut bar.

- Nismo indicators.

Can't wait to take it for a drive and start on the cosmetics! :laugh:

Thanks again! Appreciate it,

Cas.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/
Share on other sites

Welcome Cas!

Has this car got rego in QLD? If so you won't have to take it over Regency, you will be able to go next door to the Surt Cop Shop, and they can go over the relevant numbers for you to get it rego'd here and in your name! They are a bit better than taking your chance thru Regency!

Going thru what you have listed, you might be able to get thru as is, BUT i would wind up the coilovers a bit so it's not too low!

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2686633
Share on other sites

Really? Sweet, yeah it was registered in Queensland and doesnt expire for a while..

Not having to go through regency or the cop shop before, i dont know much about this... any more info? or where i can read about it?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2686659
Share on other sites

Try having a read of some of these pages, they will help you out!

Note that it says something about if your within 40km from the city you need to go to Regency, BUT that is crap, you won't have to! Maybe ring up Darlington Cop Shop, and ask when thier office is open next door to them!

http://www.transport.sa.gov.au/registratio...egistration.asp

Once inspected, they will give you some forms which you need to take to the Transport SA office and you can then pay for the registration!

Edited by Deluxe
Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2686901
Share on other sites

Welcome Cas, yeah as stated above.... I bought my GTR from brisbane in february and took it thru sturt inspection depot no hassles. If you have current rego and the car is not BLATANTLY defectable then you have no dramas!!

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2686924
Share on other sites

Welcome Cas and good luck with the car, make sure that nothing is visible tho or they will have a shot at you. Like the turbo timer, anything they can spot easily will stop you from getting thru. Good luck and look forward to seeing you at a cruise or photoshoot.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2687072
Share on other sites

Welcome sounds like an awesome car.

I nearly got a 40th aniversary 33 and kinda wish i did.

I really like the shape of them and the badging.

Be sure to post some pics up when you get it and remember to come to all our events as we are all a great bunch of like minded people.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2687200
Share on other sites

Hey Cas

welcome,

as said above if the car has been registered in another state you only need an identity check not a full regency check, what area do you live in? there is a station next to sturt police that do the inspection on wednesday and thrusday these guys are usually more relaxed about the cars that go through ( at least they used to be 12 months ago when i used to have to go down there) They do check tint.

good luck with it all and enjoy

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2687964
Share on other sites

you shouldn't need to take out the turbo timer just don't have it on

as long as the car has been previously registered they will check the VIN, ENG no and build dates and compare them against the database to make sure that the car isn't stolen

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2688191
Share on other sites

All they did when i got my car from queensland where it was complied was to check the VIN and engine no.

Then they signed a form and i went to the registration office in goolwa, paid a few grand in stamp duty :< and went on my merry way.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2688274
Share on other sites

Hi and Welcome Cas

Damm it there i was thinking that i was the only one in SA with the 40th Anniversary Black R33 but i love it so much its almost like a child and just as expensive as one hehehe :D

Anyways watch out for Regency i just had to swap over my plates to SA and what a bitch it was, the worse part it was for a stock Hyundai Lantra they picked on my window tint and my E2 Stamped Momo :D

For sure it would be best to take it to a cop shop and less expensive the Regency park.

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2694639
Share on other sites

oh sweet! man am i hanging out to get this car!

Black Vash - i havent seen any in SA, an thought i was gonna be the only one too! ;) in fact, i dont think ive even seen a black S2, or maybe havent been looking hard enough.

thanks again..

Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2694943
Share on other sites

actually, Black Vash... have you got any pics of your car? it'd be good to have a look at.

Yeah i do but my internet has been capped at the moment so all i can do is view webpages and thats about it, so i cant even upload one pic ;) dammmm u Optus lol

PS only seen S1 Black R33s but havnt seen a S2 one yet :miner:

Edited by Black_Vash
Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2695117
Share on other sites

Black Vash - i havent seen any in SA, an thought i was gonna be the only one too! :( in fact, i dont think ive even seen a black S2, or maybe havent been looking hard enough.
PS only seen S1 Black R33s but havnt seen a S2 one yet :)

Hi Cas, welcome to SAU!! Hahaha... based on the comments from you and Black_Vash, I think it's time for me to drive around more often!! lol...... :) Anyway, best of luck with your car. :no:

Edited by bixby
Link to comment
https://www.sau.com.au/forums/topic/143966-hi-guys/#findComment-2696246
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...