Jump to content
SAU Community

Recommended Posts

guys,

im confused with after market BOV, i mean std one for R32 is plum back, so if i swap for atmo one and block the plum back...is that bad for the turbo? because people tell me that it ruins your turbo or something....confused me BADLY@@!@

any help would be great!!

THANKS guys

Link to comment
https://www.sau.com.au/forums/topic/144035-is-blocking-the-std-plumback-bad/
Share on other sites

You're confusing two things for one. You either swap your stock plumb back BOV for an ATMO one or you BLOCK the standard one. They generally both screw up your AFM readings resulting in backfire, stalling issues, idle issues.

I've blocked the stock BOV and the only thing I've noticed is that perhaps my fuel economy has gone down abit and that I get the occasional loud pop (backfire) on gearchanges. No stalling or idle issues.

ok well....im talking bout removing the std BOV and installing atmo one and blocking of that pipe....LOL no idea wats its called... i mean i swaped it over....car was fine for a bit...then the thing i used to block the pipe started leaking and then the car began stalling and shitting itself...

so i put std bov on again and yer fine....

so i dunno wat to do...i luv the sound of aftermarket bov though. atmo one that is

Ahh I understand, you fitted the BOV and blocked the recirculation pipe. Just make sure the bung used to block the pipe is on tight with a hose clamp. If you have problems regarding idle its most like your BOV is leaking.

Run a MAP sensor... no stalling or idle issues at all :happy:

Coke Cap = BAD - I had this in there for a day before I got the Turbosmart plug (billet) and it melted; I'm lucky that the temps did not get hot enough to turn it into a liquid and run down the recirc pipe.

IMO; if you must use DIY bungs, the end of a broom stick is better!

FLUTTER ON BRO....

waa? I don't know any one who has one with a BOV :) I meant any r32 model, btw.. All have the outlet on the inlet piping but all were blocked with rubber grommets.. Not to mention everything i've read on this site seems to suggest rb20's were BOV-less :woot:

Do you actually know anyone with an R32? The outlet on the inlet you speak of is actually the inlet for the plumback piping from the standard bov which is located on the standard crossover pipe..

Now I am questioning whether you can actually read at all :)

Beer Bottle Caps as Bungs FTW! Used two for a long time, no dramas. Also if you are smart, you put the question facing outward, then you have a little bit of trivia to keep you company each time you open the bonnet.

No, not kidding. Have pics of setup.

Well i know 3 people with them and all of the BOV outlets are bunged up (well the outlets from the plumb??). I thought r32 gts-t and below were all BOV-less.. I've never really looked into BOV's and consequently know very little (so no need to go hack). To me, in most respects, they appeared quite superfluous, but if 32 gts-t's have them from standard i'd be interested in putting one on. Any pics of this crossover pipe? Or of the positioning of the BOV?

Edited by 123456

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...