Jump to content
SAU Community

Recommended Posts

Asking For $5500-$7500 ono

Car needs to be re-registered and complied

1990 built

Black

Intercooler

BOV

Exhaust

S15 Interior (seats/Dash)

CA18DET

Manual 5 speed

This car is my mates car he wanted me to to put it up for sale in the forum

i will give you his contact number and who ever wants to speak to him about the car feel freee to call him

with any questions, from what i know the car has no oil leaks and no engine problems.

contact number is 0404764166

once again the car is in Sydney

contact [email protected]

post-33287-1164236647.jpg

post-33287-1164236661.jpg

post-33287-1164236668.jpg

Edited by vini
Link to comment
https://www.sau.com.au/forums/topic/144412-180-sx-for-sale/
Share on other sites

how can the car need to be re-registered and complied??

if it was registered ever, it would have been complied, if it were complied, it doesn't need it again.

as above, is this manual? *ooops i see it is manual* quite keen if it just needs rego and isn't broken!!

if its manual and it only needs to be re-registered, i may be interested. very cheap tho, any catch? such as problems?

Edited by psybic
Link to comment
https://www.sau.com.au/forums/topic/144412-180-sx-for-sale/#findComment-2698129
Share on other sites

theres no problesm with the car yes the car was registerd but there were issues with the compliance so it needs to be re complied for more information let me know and i will give you the owners number.

how can the car need to be re-registered and complied??

if it was registered ever, it would have been complied, if it were complied, it doesn't need it again.

as above, is this manual? *ooops i see it is manual* quite keen if it just needs rego and isn't broken!!

if its manual and it only needs to be re-registered, i may be interested. very cheap tho, any catch? such as problems?

Link to comment
https://www.sau.com.au/forums/topic/144412-180-sx-for-sale/#findComment-2698445
Share on other sites

If it can be complied....

Owners number? So you are not only not the owner, but you can't even explain what is required to purchase the car?

How about you just state what the issue was with compliance. Yes looks cheap, but I'm sick of looking into bargain priced cars and wasting time to find out there is something dodgey that could have been posted up in the first place to save our time.

So how can a car become un-complied?

It either has:

Import approval

Been Engineered ( with necessary mods for compliance )

Been complied ( under either rule, SEVS or 15yr, depending when it came in under which approval )

Has had blue slip to verify engine number, engineers cert and VIN all match.

-- OR --

It hasn't.

To make things easy for you at least.

I'll make a CLEAR offer.

$7000 - with 12 months NSW rego and engine compression tests fine, no oil leaks or other mechanical problems.

Link to comment
https://www.sau.com.au/forums/topic/144412-180-sx-for-sale/#findComment-2699814
Share on other sites

This car is my mates car he wanted me to to put it up for sale in the forum

i will give you his contact number and who ever wants to speak to him about the car feel freee to call him

with any questions, from what i know the car has no oil leaks and no engine problems.

contact number is 0404764166

once again the car is in Sydney

If it can be complied....

Owners number? So you are not only not the owner, but you can't even explain what is required to purchase the car?

How about you just state what the issue was with compliance. Yes looks cheap, but I'm sick of looking into bargain priced cars and wasting time to find out there is something dodgey that could have been posted up in the first place to save our time.

So how can a car become un-complied?

It either has:

Import approval

Been Engineered ( with necessary mods for compliance )

Been complied ( under either rule, SEVS or 15yr, depending when it came in under which approval )

Has had blue slip to verify engine number, engineers cert and VIN all match.

-- OR --

It hasn't.

To make things easy for you at least.

I'll make a CLEAR offer.

$7000 - with 12 months NSW rego and engine compression tests fine, no oil leaks or other mechanical problems.

Link to comment
https://www.sau.com.au/forums/topic/144412-180-sx-for-sale/#findComment-2699840
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...