Jump to content
SAU Community

Recommended Posts

Due to popular demand, i have posted my personal drift settings for the game gran torismo 3.

ENJOY!!!!!!!!!!!!!!!!

This Setup works better on the following cars:

S13/S14/S15/180sx/R32GTST/ALTEZZA/FX7FC/TURENO

For other cars with different weight displacement, modifications need to be made to these settings.

Car Modifications:

- Full Racing Suspension

- Sports Brakes & Balance Controller

- Stage 3 Turbo

- Racing Intercooler

- Racing Muffler

- Sports Chip

- Port and Polish

- Full Engine Balance

- Full Racing Transmission

- Triple Clutch

- Racing Flywheel

- Carbon Driveshaft

- LSD Full Customize

- Weight Reduction Stage 3

Basically you need the best stage of all these modifications

"IMPORTANT"

Tires play a big part in this, you NEED simulations on the back and the best racing tires on the front.

Dont forget to set - ASM and TCS set to zero. That is, anti sway, and traction controol.

Settings:

SR - minimum /minimum

RH - minimum/minimum

Bound - 6 / 7

Rebound - 6 / 7

Camber - 6.0 / 1.0

Toe - -1.5 / 0.5

Stabs - 2 / 4

Brakes - Rear:9 / Front: 24

LSD: Initial = 20, Accel = 50, Decel = 20

With the Gear ratios, on stage 3 turbo, try and drop it down by about 3to 4. say your on 30, get it down to 27ish.

Link to comment
https://www.sau.com.au/forums/topic/14625-gt3-drift-settings-here/
Share on other sites

Altezza = RWD

FX7FC.. do you mean RX-7 FC? yes.

3. can we use a stage 4 turbo instead of a stage 3.. like on the S15, dont do that, way too much lag, and you need to lower the gear ratios, and with lotsa lag, compensated with gear ratios...it frys the tires WAY to easly, and its not as fun or realistic or easy.

4. are FD RX-7's any good?....yes.

  • 4 months later...

yeah the same with me. i set them with my standards then tune them after that... what settings do you use as your "Trial Tune"? the way i set mine is, Tires Super Soft in the front and Med in the rear, I get the best in ALL the mods. I tune the suspention slammed... then the bound and rebound one step down on the front, camber 0 front 3 rear, tranny i make the gearing to the middle for the max of both worlds :P , then i just play around with thows settings... after i do a trial run.

Originally posted by predator666

Does it feel like drifting in the game though? Or just a half-ass comparison

apparently GT4's engine should be able to much more accurate emulate drifto..

yeah it does it feels just like my car when i go sideways... its even more fun when you use a steering wheel with GT3 but GT4 WILL be better... i can wait
  • 3 weeks later...

I like using the 22B Subaru for drift.

Sounds crazy I know, but it is the best car I've used so far.

You need to have it fully modified with the best of everything, then you have to set the torque split to 10/90 and the ASM and TCS to 0. Also you have to use simulation tyres.

you mean you like to drift in free run mode?

or you use the A/B/C class cars in free run without mods?

unmodded car drifting?

predator666:, i gather you know what real drifting feels like....and yeh you get most of the feeling, apart from the inertia feelings you get in a real car...

i wish there was a GT3 meet or LAN style meet for this, cus id love to drift with the best in a 6 player shoot out.

perhaps we can all go get GOLIVE or whatever it is and play online with eachother heheh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...