Jump to content
SAU Community

Recommended Posts

Due to popular demand, i have posted my personal drift settings for the game gran torismo 3.

ENJOY!!!!!!!!!!!!!!!!

This Setup works better on the following cars:

S13/S14/S15/180sx/R32GTST/ALTEZZA/FX7FC/TURENO

For other cars with different weight displacement, modifications need to be made to these settings.

Car Modifications:

- Full Racing Suspension

- Sports Brakes & Balance Controller

- Stage 3 Turbo

- Racing Intercooler

- Racing Muffler

- Sports Chip

- Port and Polish

- Full Engine Balance

- Full Racing Transmission

- Triple Clutch

- Racing Flywheel

- Carbon Driveshaft

- LSD Full Customize

- Weight Reduction Stage 3

Basically you need the best stage of all these modifications

"IMPORTANT"

Tires play a big part in this, you NEED simulations on the back and the best racing tires on the front.

Dont forget to set - ASM and TCS set to zero. That is, anti sway, and traction controol.

Settings:

SR - minimum /minimum

RH - minimum/minimum

Bound - 6 / 7

Rebound - 6 / 7

Camber - 6.0 / 1.0

Toe - -1.5 / 0.5

Stabs - 2 / 4

Brakes - Rear:9 / Front: 24

LSD: Initial = 20, Accel = 50, Decel = 20

With the Gear ratios, on stage 3 turbo, try and drop it down by about 3to 4. say your on 30, get it down to 27ish.

Link to comment
https://www.sau.com.au/forums/topic/14625-gt3-drift-settings-here/
Share on other sites

Altezza = RWD

FX7FC.. do you mean RX-7 FC? yes.

3. can we use a stage 4 turbo instead of a stage 3.. like on the S15, dont do that, way too much lag, and you need to lower the gear ratios, and with lotsa lag, compensated with gear ratios...it frys the tires WAY to easly, and its not as fun or realistic or easy.

4. are FD RX-7's any good?....yes.

  • 4 months later...

yeah the same with me. i set them with my standards then tune them after that... what settings do you use as your "Trial Tune"? the way i set mine is, Tires Super Soft in the front and Med in the rear, I get the best in ALL the mods. I tune the suspention slammed... then the bound and rebound one step down on the front, camber 0 front 3 rear, tranny i make the gearing to the middle for the max of both worlds :P , then i just play around with thows settings... after i do a trial run.

Originally posted by predator666

Does it feel like drifting in the game though? Or just a half-ass comparison

apparently GT4's engine should be able to much more accurate emulate drifto..

yeah it does it feels just like my car when i go sideways... its even more fun when you use a steering wheel with GT3 but GT4 WILL be better... i can wait
  • 3 weeks later...

I like using the 22B Subaru for drift.

Sounds crazy I know, but it is the best car I've used so far.

You need to have it fully modified with the best of everything, then you have to set the torque split to 10/90 and the ASM and TCS to 0. Also you have to use simulation tyres.

you mean you like to drift in free run mode?

or you use the A/B/C class cars in free run without mods?

unmodded car drifting?

predator666:, i gather you know what real drifting feels like....and yeh you get most of the feeling, apart from the inertia feelings you get in a real car...

i wish there was a GT3 meet or LAN style meet for this, cus id love to drift with the best in a 6 player shoot out.

perhaps we can all go get GOLIVE or whatever it is and play online with eachother heheh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...