Jump to content
SAU Community

Recommended Posts

its exactly the same as any import, you get about 10% of the value of your mods back.

always keep the stock parts, put them back on and sell the bits to people on here.

99% of buyers won't tell the difference between always stock and de-modified....how sure are we all that there were no mods in jp?

If I bought a car expecting it to have always been stock and it was simply demodified I would not be happy when I found out and would go to court over it.

IF I was told that the car was demodified then I'd still probably get it if it was a good deal, but if you lie about something that simple I have no idea what else you are lying about.

Are you saying that you would not want such a $$ value amount of mods (BASIC mods that are generally the first everyone does) for such a small outlay??? Especially if you were planning to mod it urself anyway? hmmm... me no comprende the logic there

Id rather the car be modded and kept modded, or NEVER modded. Being that most cars ive seen put back to stock for a sale, the owner has done a quick careless job.

At the end of the day, it not so much a "how should i sell it" question, it really depends on what the owner wants, there are a few different target markets (modded cars, non-modded, light mods etc) you just have to decide which one you will aim the car at and advertise accordingly.

The two first mods people do...

Exhaust and Pod.

I don't want a pod, and chances are they have an exhaust system of pretty crap quality and I'll rip it off and get a new one put on. If they can prove it was a decent quality system then I won't care... I also want the car to be as quiet as possible but still decent airflow. Most people from what I've seen just want it damn loud.

Same goes for sound systems. I'd rather nothing in there - saves me the trouble ripping the crap quality stuff out.

EDIT: I also know little about engines so this will be a learning curve for me so its not only that its modded or not it is also going to be teaching me.

Edited by Midol
The two first mods people do...

Exhaust and Pod.

I don't want a pod, and chances are they have an exhaust system of pretty crap quality and I'll rip it off and get a new one put on. If they can prove it was a decent quality system then I won't care... I also want the car to be as quiet as possible but still decent airflow. Most people from what I've seen just want it damn loud.

Same goes for sound systems. I'd rather nothing in there - saves me the trouble ripping the crap quality stuff out.

EDIT: I also know little about engines so this will be a learning curve for me so its not only that its modded or not it is also going to be teaching me.

If you cant take a pod off and put the normal filter box back on a 25det in 10min, u shouldnt be near an import! lol

A good quality system is one that flows well, but i still quiet enough. this is ur brand name systems. Most of us who bought stageas didnt go straight and throw an exhaust or pod on, knowing that pods are not legal unless properly shielded. And ull find that 9/10 of us here that have an exhaust system, have stainless dumps, highflow cats and a brand name or quality otherwise exhaust.

Most people who have the $$ and sense to buy a stagea, have the $$ and sense to mod one properly. Alex is one example. For other examples, see the thread on what we've done to our stageas so far.

:-)

How many stagea/skyline owners visit this site? This site represents a minority of owners. I have no doubts that the guys on this site mod theirs properly, it is the ones who just want a fulli sick sounding car that I worry about. I wasn't referring to air filters as a learning curve :/ Air filters and exhausts are things I will buy with but would prefer not to.

For example, redbook has roughly 20 stageas for sale right now and I'd say 5-6 of them MIGHT be members of SAU and thats pushing it.

Sort of like the falcon I got now - had an aftermarket exhaust on it. Last night it snapped in the middle and the car now sounds like shit and I can't afford to fix it right now. Because of some toss pots bad choice in exhaust system I have to fork out money to replace it.

This site represents a minority of owners.

Id say we represent a PERCENTAGE of owners, not a minority. If out of 10 ppl, 2 people have modified their car in a certain way, is generally safe to say out of 100 ppl, 20 have done so also. Called statistics. Not alwys correct, but they are 90% of the time (lol at my statistic).

There arent many ways u can stuff up an air filter install, so providing the car comes with the complete factory airbox thrown in, id see it as a plus. As long as it doesnt say monza or autotechnica etc... You can generally tell when a private seller is a moron, and alex doesnt strike me as that way. He may have made some odd decisions about how he took a particular corner, but as far as modifications go he is pretty on the ball, so id happily purchase his modified car off him.

I guess there are a lot more factors than just modded or not, depends on the mods and the quality. In this case, as a buyer i think most would appreciate leaving them on the car for a measely few grand. xo

Minority

# a group of people who differ racially or politically from a larger group of which it is a part

# being or relating to the smaller in number of two parts; "when the vote was taken they were in the minority"; "he held a minority position"

# any age prior to the legal age

wordnet.princeton.edu/perl/webwn

Refer to the 2nd point, we are the smaller of a number of two parts - of owners. This site represents a minority of owners.

I don't know who Alex is so I have nooooooooo idea what car you are talking about, lol.

But also to do with buying it depends on how much $$$ in funds I have at the time. If the car has been modified tastefully and with quality parts then I am more likely to get it, but when I was looking at skylines I found the majority had been modified with below average quality mods and I'd rather have stock.

but when I was looking at skylines I found the majority had been modified with below average quality mods and I'd rather have stock.

Yes, and ill reply by saying that this is a stagea forum, and i dont think there is a poor quality, cheap mod between all the cars of those people who regularly post here. We pride ourselves on being the exception to the "dumbass young slyine driver" mentality that is out there.

PM me if u want to continue this discussion, or get out of alexs stagea thread.

CY?? if u could delete the last few posts here thatd be sweet!!

LOL, whats the shit fight starting over.

I am not particularly looking at selling my car, just want to understand the mindset behind people that are buying cars, and stageas in particular.

The reason I started this thread is because I see a lot of people selling their stageas, with heaps up on carsales and at dealers (something like 20-30 for sale, with only 350 in the country is a big % for sale) and thought people might need some advice.

So the points we have found so far:

- As long as its done properly the car being modded should be OK

- Alternative is not a half modded car, but a stock stock car

- Mods done in a clean and tidy manor

I wasn't fighting :thumbsup: I was just discussing my reasons for wanting a fairly stock stagea and me and Rob just misunderstood each other mostly because I didn't explain myself properly in the early posts.

I havn't been into stageas that long so I am still sussing out who owns them and what kind of people are generally attracted to them and I am finding out slowly that the majority of stagea owners are family people so fairly responsible and well thought out mods and such :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...