Pfc Interface Screen Went Blank

[Hulk1010]

The other day while driving my PFC screen on the controller went blank/turned off, the car kept driving fine, no problems. I gave it a few taps and still nothing, then i wiggled the end part of the cord that connects to the bottom of the controller and the screen came back on, first the Apexi logo apeared and then the rest of the info was back on. Is this any thing to worry about?, my guess is that a wire or something might be loose that lights up the interace on the controller

Edited December 15, 2006 by Hulk1010

[sewid]

Sounds like a connector fault. This could be one of two things.

1) dry solder joint on the pfc mainboard for the connector

2) faulty or loose cable/connector from the hand controller

both are not massive problems. If it starts happening more often you can get the connector resoldered pretty cheaply somewhere or alternatively a new cord is not that difficult to rig up.

[paulr33]

its just the hand controller plug coming loose

no big deal, the car will run fine