Jump to content
SAU Community

Recommended Posts

Pair of R33 Headlights in Good condition

Were in S3 R33 GTR - with Xenon Kit etc.

Will fit R33 GTST

In Brisbane

I rang Nissan and the list price was over $1200 each for R33 S3 GTR Lights

I'll start these at $450ea or $700 the pair

Free freight anywhere in australia.

Please feel free to make offers.

Price is negotiable

post-30259-1166519076.jpg

post-30259-1166519086.jpg

Link to comment
https://www.sau.com.au/forums/topic/147984-r33-gtr-head-lights-headlights/
Share on other sites

Update: Series 2 R33 GTR Lights - Not Series 3 as previously mentioned.

Price Drop -

$350 ea - $600/pr

thought they werent...

these are the same as the gtst headlights...

If you can send me a photo of the top of the headlights and all the brackets and spacers are there, then I will definately take these off you as I am after GTR headlights. Even if you just use a camera phone like you did to take those photos.

So can you please post a picture of the top of the headlights so I can see if all the brackets and spacers are in tact. All it takes is one photo and I will have the money in your account. It's very easy.

mate all you have there i a set of normal R33 S1 GTS-T lights and even if they came of a gtr they are the same they are worth about 150each thats it

I've been sent better photos and they are in fact GTR headlights. I have already sent money for these. GTR headlights are not the same. It is ignorant people like you Turbo1958 that make it so hard to buy the correct parts. GTR headlights have spacers between all the mounting bolts and have an extended metal bracket at the top mounting point.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...