Jump to content
SAU Community

Recommended Posts

Hey guys,

just got our new Trust Drag intercooler from CRD(thanks guys).

Its the biggest one that you can buy off the shelf.

its 710mm wide X 305mm high X a massive 165mm thick(150mm tube).

I'll be putting the cooler on this weekend, if CRD have time i'll get a power run on the sat morning then fit the cooler and then another one once the shop opens back up.

maybe even try and rerun on the sat.(fit on the friday night).

Once the cooler is fitted i can then rule out any pressure drop across the core.

I'm thinking that once this cooler is on and the 4" exhaust is back on the 700cc injectors will impose a power restriction.

CRD have said they normally see them max out at around 500-520 awkw. I'll be glade if our set-up can make that sort of power with the 33d that we have.

I know that with the 4" exhaust n the car will come on boost earlier and i should see the 500 at about 8000rpm.Since there should be no restriction up top the only thing stopping power all the way to its 8500rpm limiter would be the turbo it self.

The set-up now on the GTR is a TRUST exhaust manifold SARD wastegate, TRUST T88-33D, TRUST 710 X 305 X 165 intercooler. 4"piping to a HYPERTUNE intake manifold and HYPERTUNE 100mm TB.

The head is also ported.The cams are only the tomei 260 9.15 pon units, bu ti think they will work well with the small exhaust housing.

I'll let you all know how the new set-up goes and back to back them with our old GT-SS set-up.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/148001-just-got-our-new-trust-drag-cooler/
Share on other sites

I Have to take some photos and take them around to dough boy to put up how about i just give him the photos of the intercoolers and the dyno tuns on sat as i'vce just booked the car in for a power run at C&V at 7.30 on sat morning wich should give the guys at Hypertune enough time to install the cooler to a stage where i can drive the car around for the after power run.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
×
×
  • Create New...